4-11-8.
Split Frequency Operation
Different frequencies can be selected for VFO A, VFO B and for memory.
For example:
VFO A is the active VFO, and VFO B is the inactive VFO. Depressing the SPLIT key will cause the transceiver
to receive on VFO A and transmit on VFO B. The mode of reception and transmission will follow the mode
contained in the appropriate VFO.
To avoid confusion during contest, or pile-up operations we recommend using VFO A for receive and VFO B for
transmit.
To perform split frequency operation with a memory channel, you must activate Power On Menu item 12, then
select the desired TX mode with the SPLIT key. Pressing the SPLIT key will step the TX VFO from A to B to M.
(See 4-11-15, Power On Function Control.)
i :
RX , 8
RX,
=
M
é
x=?
1x5
RX »
RX
RX
_°
M
M
™x*
&
tx
&
TX
TF-SET key
1. When the TF-SET key is pressed, the transceiver
|
dada
aK
Logi
° ° O12 o
2. When the TF-SET key is held down and the tuning
knob is turned, the transmit frequency of the
transceiver can be checked or set in receive mode.
3. After setting and checking the transmit frequency,
release the TF-SET key. The frequency returns to
the original receive frequency.
46