Reading The Configuration Data From The Transceiver; Embedding A Message In The Transceiver (Embedded Message); Embedded Message - Kenwood NX-240 Function Reference

2 GETTING STARTED
2.3 Reading the Configuration Data from the Transceiver/ 2.4 Embedding a Message in the Transceiver (Embedded Message)
2.3

Reading the Configuration Data from the Transceiver

To change the data configured in the transceiver, read the configuration data from the transceiver to KPG-169D/
KPG-170D/ KPG-175D, and then write the configuration data to the transceiver after the configuration data has been
changed.
Selecting "Read Data from the Transceiver" from the Program pulldown menu in the main window of KPG-169D/
KPG-170D/ KPG-175D opens the Read Data from the Transceiver dialog box. Clicking the "Read" button starts reading
the configuration data from the transceiver.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Reading the configuration data from the transceiver (
2.4

Embedding a Message in the Transceiver (Embedded Message)

The message can be written to the transceiver by using KPG-169D/ KPG-170D/ KPG-175D.

Embedded Message

Embedded Message can be used to store a maximum of 64 characters in the transceiver. The transceiver profile
information, such as the control number and the file name of the configuration data written in the transceiver, can be
embedded.
The message can be written to the transceiver by using KPG-169D/ KPG-170D/ KPG-175D. The message written in the
transceiver is stored as a part of the configuration data.
The embedded messages can be read from the transceiver by using KPG-169D/ KPG-170D/ KPG-175D.
Configuration using KPG-169D/ KPG-170D/ KPG-175D
Configuring the Embedded Message (
FUNC (K)/Ver 1.20
Figure 2-3 Read Data from the Transceiver Dialog Box
See
Edit > Embedded Message)
See
Program > Read Data from the Transceiver)
CONTENTS INDEX 7