Advertisement
2
Speed Control
Trigger
4.5. USING THE DRILL
4.6. Ensure that you have read, understood and comply with all the safety instructions in Section 1.
4.7. Refer to fig.3 and fig.4 for use.
5. CONTENTS
5.1. Tool case
5.2. Spanner
5.3. Adjustable wrench
5.4. Pliers, hammer, saw
5.5. Electric drill with assorted drill bits
5.6. Screwdriver
5.7. 3x nuts, 3x bolts and 2x pre-drilled blocks.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
1
fig.1
Forward, reverse
switch
Press button for release
of battery pack
fig.3
Original Language Version
2
1
2
1
1
2
fig.2
Speed control
fig.4
sales@sealey.co.uk
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
JTK1 Issue:2 06/02/23
Advertisement
