Kenwood 107VR Instruction Manual page 24

When playing videotape (DVD or LD) software carrying the
(00) pasy suc] mark, a sound field with enhanced surround
effects can be enjoyed by using the DOLBY PRO LOGIC or
DOLBY 3 STEREO mode.
Other surround modes can also be used effectively with any
kind of source.
Be sure to complete "Adjustments for surround play" prior
to starting playback in one of these surround modes.
Surround pla
Select one of the surround modes.
@ Select the desired surround mode.
Qe
Nae
@ Select the desired sound field.
(This step is required only wnen "DSP "
"DSP LOGIC" 1s selected in @ above}
2 | Play a video software program.
Ej Adjust the volume.
To cancel the SURROUND play
LISTEN
MODE
Ls
Remote contra ur
1O7VA (Em
Keys or controis te be usea in. ths operon
Each press of LISTEN MODE key switches the modes as foliows.
1 STEREO
2 PRO LOGIC
3 3 STEREO
4 DSP
5 DSP LOGIC
e@ihe surround modes can also be selected directly using the corre-
sponding keys on the main unit.
' oer Lights
SURROUND
Example wnen DOLBY PRO LOGIC 1s seiectea
For DSP mode
1 ARENA :Reproduces the feeling of sitting in the
front row of an arena concert.
2 JAZZ CLUB:Reproduces crisp cymbal crashes like at
a jazz club.
3 STADIUM :Reproduces a feeling of release
associated with the near absence of
reverberation reflected from the ceiling.
For DSP LOGIC mode
1 LARGE :Reproduces the presence of a large
[ movie theater.
2 SMALL :-Reproduces the presence of a relatively
small movie theater.
e To change the sound field, repeat step BM trom the beginning.
e@The center speaker does not output sound when the DSP mode 1s
selected
On the remote controt unit, the following modes are switched every time
tne LISTEN MODE key is pressed
1 STEREO
' 2 PRO LOGIC
3 3 STEREO
Goes off
Manufactured under licence from Dolby Laboratories Licensing Corporation.
"Dolby", "Pro Logic" and the double - D symbol are trademarks of Dolby Laboratories Licensing Corporation.