Consumer Notices
FCC NOTICE :
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, & can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving antenna; (2)
Increase the separation between the equipment and receiver; (3) Connect the
equipment into an outlet on a circuit different from that to which the receiver is
connected; or (4) Consult the dealer or an experienced radio/TV technician for
help. Changes or modifications not expressly approved by the party
responsible for compliance to Part 15 of the FCC Rules could void the user's
authority to operate the equipment.
CE NOTICE
: This equipment has been tested and found to comply with the limits
for a Class B or Class 2 digital device, pursuant to EN 55032 & EN 55035 Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at the expense of the user. Changes or
modifications not expressly approved by the party responsible for compliance to
EN 55032 & EN 55035 Rules could void the user's authority to operate the
equipment. This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Safety Precautions
1. Do not attempt to disassemble the sensor.
2. There are no user serviceable parts inside.
3. Do not expose or operate the sensor to rain or moisture.
4. Do not clean the sensor with strong chemicals or acids.
5. Do not operate the sensor beyond its operating temperature.
6. Do not operate the sensor beyond its operating humidity.
7. Do not operate the sensor beyond its operating voltage.
What's in the box?
1. MFS110
2. Cleaning Cloth
MANTRA SOFTECH (INDIA) PVT. LTD
ISO 9001:2015 CERTIFIED COMPANY
Download Drivers & SDK
http://download.mantratecapp.com
Support / Service Email
http://servico.mantratecapp.com
servico@mantratec.com
On Call Support & Service
Cell: 079-49068000 (Press 1 for support services )
MFS110
Optical Fingerprint Scanner
.
Mantra Softech is a Global Hi-Tech Manufacturer of Biometric Products and
Solutions. We Offer a Wide Range of Products in Biometric and RFID Industry.
RMA Support
Need help?
Do you have a question about the MFS110 and is the answer not in the manual?
Questions and answers