MacDon 9200 Operator's Manual page 39

OPERATION
Attaching the Header (continued)
6. Connect driveline to header drive shaft as
follows:
Pull back spring loaded collar (G) on driveline
yoke and slide yoke onto header shaft.
Release coliar, ensuring yoke locks in position
on shaft.
7. Hydraulic Hose Connections:
920, 932 Headers: Two connections are made
at couplers
(Al
and (8) at the header right
hand leg. One connection is made at coupler
(0)
at
the header left hand leg .
942, 960 & 970 Headers: Two connections are
made at couplers (A) and (8) at the header
right hand leg. Two connections are made at
couplers (C) and (E) at the tractor left hand
leg. One connection is made at coupler (0) at
the header left hand leg.
A - reel drive pressure
B - reel drive return
C - reel lift
o -
conveyor drive pressure
E - conveyor drive return
8. Connect the header electrical wiring harness
at connector (F).
37
CONNECT DRIVELINE
HYDRAULIC CONNECTIONS - RlH SIDE
HYDRAULIC & ELECTRICAL CONNECTIONS
UH SIDE