Disassembling/Assembling The Junction Box Of Drive - INVT MH860A Series Operation Manual

MH860A series hydraulic servo drive
Cooling air
In cabinet
(Correct installation method)

3.3 Disassembling/assembling the junction box of drive

To disassemble the junction box of drive (for example, MH860A-S038TF7), do as follows:
Step 1 Loosen and remove the screws of the junction box.
Step 2 Press the snap-fit, pull the junction box outward and take it out.
To assemble the junction box of drive (for example, MH860A-S038TF7), do as follows:
Step 1 Put the junction box horizontally into the convex groove, and push the box so that the
junction box and the housing slit overlap.
Step 2 Fasten the two fastening screws of the junction box.
Ventilation fan
Figure 3-5 Ventilation fan installation position
Ventilation fan
In cabinet
(Incorrect installation method)
Loo sen th e sc rew
Pr es s the s nap a nd
gen tly lift the c ov er
-17-
Mechanical installation
Cooling air