Related Manuals for Creda TCR2
Summary of Contents for Creda TCR2
-
Page 1: Tumble Dryer
Tumble Dryer Instruction Book TCR2 You must read these instructions prior to using the appliance and retain them for future reference... -
Page 2: Table Of Contents
Instruction booklet Contents Installation, 2 Door reversal instructions Where to put your dryer Ventilation Water drain Electrical connection Before you start using your dryer Dryer description, 3 The front The back Control panel Start and programmes, 4 Choosing a programme Laundry, 5-6 Sorting your laundry Wash care labels... -
Page 3: Installation
Installation ! Keep this instruction booklet on hand in order to refer to it when necessary. Take it with you when you move, and should you sell this appliance or pass it on to another party, make sure that this booklet is supplied along with the dryer so that the new owner may be informed about warnings and suggestions on how the dryer works. -
Page 4: The Front
Dryer Description To open the door Press and release the front panel in position shown Control panel The START button begins drying a selected programme (see Start and Programmes). The HEAT button selects drying temperature (see Start and Programmes). OUT: HIGH heat. IN: LOW (Gentle) heat. -
Page 5: Start And Programmes
Start and Programmes Choosing a programme 1. Plug the dryer into the electrical socket. 2. Sort your laundry according to fabric type (see Laundry). 3. Open the door make sure the filter is clean and in place and the water container is empty and in place (see Maintenance). -
Page 6: Laundry
Laundry Sorting your laundry Check symbols on clothing labels to make sure that the articles can be tumble dried. Sort laundry by fabric type. Empty pockets and check buttons. Close zippers and hooks and tie loose belts and strings. Wring out each item in order to eliminate as much excess water as possible. -
Page 7: Laundry
Laundry Special clothing items Blankets and Bedspreads: acrylic items (Acilan, Courtelle, Orion, Dralon) must be dried with special care on LOW heat setting. Avoid drying for a long period of time. Pleated or creased garments: read the manufacturer’s drying instructions on the garment. Starched articles: do not dry these with non- starched items. -
Page 8: Warnings And Suggestions
Warnings and Suggestions ! The appliance has been designed and built according to international safety standards. These warnings are given for safety reasons and must be read carefully. This appliance conforms to the following EEC Directives: - 72/23/EEC and 93/68/EEC (Low Voltage Equipment) - 89/336/EEC, 92/31/EEC and 93/68/EEC (Electromagnetic Compatibility) General safety... -
Page 9: Maintenance And Care
Maintenance and Care Switching off the electricity ! Unplug your dryer when not using it, when cleaning it and during all maintenance operations. Clean the filter after each cycle The filter is an important part of your dryer: it accumulates lint and fluff that is formed while drying. When finished drying, clean the filter by rinsing it under running water or with your vacuum cleaner. -
Page 10: Troubleshooting
Troubleshooting One day your dryer seems not to be working. Before you call your Service Centre (see Service), go through the following troubleshooting suggestions: Problem: The tumble dryer won’t start. Its taking a long time to dry. Possible causes / Solution: The plug is not plugged into the socket, or not making contact. -
Page 11: Service
Service Before calling the Service Centre: Use the troubleshooting guide to see if you can solve the problem yourself (see Troubleshooting). If not, turn off the dryer and call the Service Centre closest to you. What to tell the Service Centre: name, address and post code. -
Page 12: Repair Service
(Please keep the receipt as evidence will be required when the engineer calls). For further product information 08701 546474 All Creda Services are offered as an extra benefit and do not affect your statutory rights. Merloni Elettrodomestici UK Ltd, Peterborough, PE2 9JB.
Need help?
Do you have a question about the TCR2 and is the answer not in the manual?
Questions and answers