1. Manuals
  2. Brands
  3. Hanwha Vision Manuals
  4. Network Hardware
  5. XRN-3210B4
  6. User manual

Hanwha Vision XRN-3210B4 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK VIDEO RECORDER
User Manual
Wisenet NVR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XRN-3210B4 and is the answer not in the manual?

Questions and answers

Related Manuals for Hanwha Vision XRN-3210B4

Summary of Contents for Hanwha Vision XRN-3210B4

  • Page 1 NETWORK VIDEO RECORDER User Manual Wisenet NVR...
  • Page 2 ❖ Design and specifications are subject to change without prior notice. You can download the latest version from the Hanwha Vision web site. (www.HanwhaVision.com) ❖ The initial administrator ID is “admin” and the password should be set when logging in for the first time.

  • Page 3: Overview

    Monitor real time events that occur in Recorder, sensors, and cameras or search through logs Before using this product, check if the latest version of this software is installed. Go to Hanwha Vision's website (http:// www.HanwhaVision.com) to check the software version and download necessary files.
  • Page 4 overview CAuTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ● ACCORDING TO THE INSTRUCTIONS. Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause ●...

  • Page 5: Functions Supported By Model

    SuPPORTED by MODEl PRN-6400B4 PRN-6405B4 XRN-6410B4 Model name PRN-3200B4 PRN-3205B4 XRN-3210B4 XRN-6410B2 XRN-1620SB1 PRN-6400DB4 PRN-6405DB4 XRN-6410DB4 XRN-1620B2 PRN-3200B2 PRN-3205B2 XRN-6410RB2 XRN-3210B2 XRN-820S Function PRN-1600B2 PRN-1605B2 XRN-3210RB2 Joystick Extended monitor Failover Alarm RAID Distributed recording iSCSI AI compatible function AI search...

  • Page 6: Table Of Contents

    overview CONTENTS OVERVIEW Important Safety Instructions Real-Time Event Monitoring Check Event List Product User Manual Description Target Audience Event Search How to Use the Product Event Instant Viewer Functions Supported by Model Stop Alarm Output Contents Camera Video Control Manual trigger Capture gETTINg STARTED Starting the system...
  • Page 7 AI SEARCH Screen Layout of the AI Search Setting the Network Person Search IP & Port Face Search DDNS & P2P Vehicle Search IP Filtering LP Search HTTPS LPR Search 802.1x E-mail PlAy Screen Layout of the Play SNMP Play Search Results DHCP Server Time Line Adjustment Failover...
  • Page 8 overview SEARCH VIEWER Changing the Pattern of Split Screen 102 Screen Layout of the Search Viewer Changing Overall Channel Aspect Ratio 102 Time Search Full Screen Mode 103 Event Search Setting up the Live Layout 103 Text Search Check Layout List 104 Bookmark Search Add Layout and Set Name 104 Search Results Export...
  • Page 9 SETuP VIEWER 111 Screen Layout of the Setup Viewer ExPORT VIEWER 126 SEC Backup Viewer 111 Setting the Camera 126 Recommended System Requirements 111 Channel setup 126 Screen Layout of the Backup Viewer 111 Camera setup 112 Profile Setup 113 Camera Password APPENDIx 128 Use Joystick 113 Setting the Recording...

  • Page 10: Getting Started

    getting started Starting the SyStem inStallation Wizard As shown below, proceed through each step of the <installation wizard>. 1. Connect the power cable of the recorder to the wall outlet. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <exit>. 2.
  • Page 11 3. Set the network connection type and the connection environment on the <network> screen, and then click the Setting the camera registration method <next>. This function is only available for products that support PoE. For products that support PoE, refer to the "Functions Supported by model"...
  • Page 12 getting started 5. Set the camera password in factory reset on the <Camera id/PW> screen. 7. On the <Camera register> screen, select a camera to register from the searched camera list and click <register>. If ID/PW is already set in the camera, register the ID/PW and click <next>. Select a camera to register from the list and click <Change iP>.

  • Page 13: Camera Setup

    9. On the <easy connect> screen, a remote user can network a recorder in a dynamic IP system. Camera SetUP Click <enable> to test the connection to see if the current recorder can be connected remotely. When the When the installation wizard closes, the camera setup screen will automatically appear. connection is successful, a QR code is created.
  • Page 14 getting started Configuring the Video environment Configuring the illumination Select the thumbnail of the channel whose settings you want to change and click < >. The setting window You can click <Setting> to change to the setting you want. that was classified according to the scene will appear. You can select items that are relevant to your channel.

  • Page 15: Shutting Down The System

    ShUtting doWn the SyStem login To use the Recorder menu, you are required to login as a user that is authorized to access the applicable menu. 1. Select <Shutdown> at the top right of the screen. 1. Select <login> at the top right of the screen. 2.

  • Page 16: Screen Layout Of The Live

    live Shows the video of the camera connected to the recorder. Also, you can adjust the camera and check the network Item Description transfer status. Saves the recorded video of the selected channel in the designated path. SCreen layoUt oF the liVe Clears the alarm in the event list and stops the alarm/beep sound for the system status when it is emitted.

  • Page 17: Checking The System Status

    Checking the System Status Item Description The icon at the top of the screen indicates the status of the system. Displayed if the server has firmware to update. It is displayed when the system is overloaded. ￭ Limit the number of users remotely monitored by Web Viewer or VMS, or control the number of events displayed in the event list of the recorder.

  • Page 18: Check Camera List

    live Check Camera list Check multichannel Cameras list For multichannel cameras registered with the Wisenet protocol, the channel information will be displayed under Displays the camera type, status, and name registered in the recorder. the model name of the multichannel camera. Registered channel (recording channel) Unregistered channel...

  • Page 19: Live Screen Menu

    live Screen menu icons on the live Screen After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen You can check the status or operation with the icons on the live screen. menu.

  • Page 20: Osd Information Display

    live oSd information display Item Description You can show or hide the recording status, camera status, event display, etc. in the video window. Events from the recorder and camera are displayed in icons. Event Display To show or hide the OSD information, click < >...

  • Page 21: Channel Information Display

    Channel information display Check the Camera Status You can check the information of the video being recorded with each camera. You can check the status of all cameras connected to the recorder. To check the channel information, click < > at the bottom of the screen. To check the camera status, click <...
  • Page 22 live record Status network Status If you select <record> in the <Status> menu, you can check the profile, record type, frame rate (Input/Record), Select <network> in the <Status> menu to check the status of network bandwidth currently being received/ and bit rate (Limit/Input/Record) for each channel. transmitted.

  • Page 23: Channel Setting

    CH10 CH11 CH12 CH13 CH14 CH15 CH16 Changing overall Channel aspect ratio ● Enable: Turns on/off the power supply to the camera. – Checked ( ): Power supply available CH19 CH19 Video screen ratio for all channels can be changed in live split screen mode. CH10 CH10 CH11...

  • Page 24: Full Screen Mode

    live Full Screen mode Setting UP the liVe layoUt You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

  • Page 25: Add Layout And Set Name

    add layout and Set name dynamic layout You can set the size and position of the video assigned to the layout as desired. 1. Click < > to add a layout. ￭ 2. Click < > to set the name for the added layout. The dynamic layout function can only be set on the primary monitor.
  • Page 26 live zooming in and out of Videos moving Videos You can enlarge or reduce the video by dragging a corner or vertex of the video in the desired direction. To move the video, click the video and then drag and drop it in the desired location. If you double-click the corner or vertex of the enlarged video area, the video will be reduced step by step.

  • Page 27: Play Layout Sequence

    Play layout Sequence real-time eVent monitoring You can automatically switch the layout list to a set time interval to view. Real-time events that occurred on the camera can be checked in the live video window and event list. ￭ AI events are only available for products that support AI. ￭...

  • Page 28: Event Search

    live event Search alarm input filter Displays the only events for the alarm input numbers of the selected recorder. You can search events by camera, alarm input (recorder), and event type. To search for a specific event, click < > to select the event type and camera to browse. event filter Displays only selected events in the event list.

  • Page 29: Event Instant Viewer

    event instant Viewer Camera Video Control Select an event to check from the event list, and click < > to play the recorded video at the time the event By using the function icon of the video window, you can easily use the functions of capture, video zoom, PTZ camera occurred.

  • Page 30: Capture

    live Capture temperature detection mode You can take a screenshot of the current video of a specific channel selected on the live screen. For images that support the thermal imaging camera function, you can click the desired point to check the temperature information.

  • Page 31: Ptz Mode

    Ptz mode zoom in You can run PTZ control of the selected channel. You can zoom in or out the video via digital zoom. Select the desired channel and click < >. Select the desired channel and click < >. Enters the PTZ control mode.

  • Page 32: Display Text

    live display text Change Channel aspect ratio You can monitor texts regarding the sales record received from POS in real time. You can change the aspect ratio of each channel. ￭ Select the desired channel and click < >. This is executable when a text device is connected. ￭...

  • Page 33: Dewarping

    PTZ driver (physical device). ￭ It only supports a network camera with Hanwha Vision's PTZ function and a camera registered in the ONVIF. Ptz Control menu You can use a single PTZ camera to perform the Pan, Tilt and Zoom operations to monitor multiple places, and configure the custom settings of the presets in a desired mode.

  • Page 34: Using Digital Ptz (D-Ptz) Function

    live Using digital Ptz (d-Ptz) Function Item Description 1. Register a camera that supports the D-PTZ profile. Zoom out/Zoom in Activate the Zoom operation of the PTZ camera. ￭ In cameras that support the D-PTZ profile, you can use the D-PTZ function. Near/Far You can adjust the focus manually.

  • Page 35: Running Preset

    to delete a registered preset exPorting the reCorded Video 1. Click < You can search the storage device to be exported and export the recorded video of the desired time by layout or >. channel. 2. Click < >. <delete preset> window will appear. 1.
  • Page 36 live 3. After completing the export setup, select <Start>. ￭ If there is no device to export, the <Start> button will be deactivated. ￭ If you click <Stop> during the export progress, which is the export will be canceled. 4. Click <oK> on the export completion confirmation window to finish. ￭...

  • Page 37: Screen Layout Of The Search

    search time Search You can search recorded video by various conditions such as time, event, and export. You can search the recorded data by the desired date and time conditions. Screen Layout of the Search ￭ The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.

  • Page 38: Event Search

    search event Search text Search You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <Search> menu. 1. Select <text search> in the <Search> menu. 2.

  • Page 39: Export Search

    export Search arB Search You can search the exported data on the connected storage device. Only data saved in recorder file format when You can search auto-recovery backup data stored on ARB storage devices. exported will be retrieved. 1. Select <arB search> in the <Search> menu. ￭...

  • Page 40: Bookmark Search

    search Bookmark Search Smart Search You can search for bookmarked data. You can search for events by selecting a region of interest, an exclusive region, or a virtual line from a recorded video at a specific time. ￭ To use smart search, you need to set the area of the camera's “Motion Detection" or “IVA” to the entire area. However, if you want to search for cameras after Wisenet X series, you must select “Enable"...

  • Page 41: Ai Search

    AI search perSon Search If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. ￭ In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. This function is not supported in some models.

  • Page 42: Face Search

    AI search face Search vehicLe Search From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1.

  • Page 43: Lp Search

    Lp Search Lpr Search You can search for vehicle license plates from the recorded data. You can search for the license plate number recognized in the recorded data. ￭ LPR search is only available on recorder models that support AI recognition. 1.

  • Page 44: Screen Layout Of The Play

    play You can play the recorded data and export the video you want during playback. item Description Screen Layout of the pLay Playback control You can control video playback. Date/Time Set the date/time. Time line Move the playback position and display event data. You can change the number of channels displayed in the time line.

  • Page 45: Play Search Results

    pLay Search reSuLtS play Button name and function paused state time Line adjustment You can move the playback position and zoom the time line in and out. ● Click the desired play position in the time line. The playback start position will be moved. ￭...

  • Page 46: Search Results Export

    play Search reSuLtS export You can export the search results to a file. 1. Click the < > button. 2. Select a layout and channel to export. 3. Select a start date/time and an end date/time. ￭ If you changed the time zone of the recorder, select whether to apply DST. 4.

  • Page 47: Setup

    setup Setting the camera Sets the camera, recording, event, device, network, and system environment. You can access to the channel setup, camera settings, and profiles and camera password-related settings. Screen Layout of the Setup Setting the channel You can register a network camera for each channel and make connection between. Setup >...
  • Page 48 setup automatic registration of network cameras ● Audio – If set to <on>, you can turn the audio of the channel ON/OFF on the Live screen. – If set to <off>, the channel's audio is off on the Live screen and not recorded. ●...
  • Page 49 – Wisenet Camera : You can register Hanwha Vision's cameras and encoders. – URL : Enter your RTSP access address. For more information, see your camera user manual. – Wisenet Multi-Channel : You can register Hanwha Vision's multi directional cameras and multi-imager – ID : Enter the camera ID.
  • Page 50 setup if you want to check the error details of camera registration network camera firmware upgrade If you failed to register a camera, the reason for the failure will be displayed. connection failed due to unknown error. : This message appears if the camera has failed to be registered ●...

  • Page 51: Setting The Camera Functions

    Setting the camera functions ● SSNR : Adjusts the brightness by reducing noise and minimizing afterimages even in dark places. Sens-up : Automatically adjusts the shutter speed according to the brightness of the current light. ● You can set the camera while viewing the live video of the selected camera. ●...

  • Page 52: Setting The Profiles

    setup Setting the profiles Setting the Live profile You can change the live transfer settings of the network camera. Setting the recording profile Setup > camera > profile setup > Live You can configure the video profile settings for instructing the network camera (connected to each channel) to make recording.
  • Page 53 Setting the remote profile editing the profiles You can set the video profile transmitted to the network. You can change the video settings of a registered network camera for each channel. Setup > camera > profile setup > remote Setup > camera > profile setup Channel selection : You can select camera channels to change their video transmission settings.
  • Page 54 setup Dewarping Setup how to set WiseStream Press the <Dewarping> button at the bottom of the <Detailed profile configuration> window to go to the Function to analyze the complexity of the video and effectively reduce the data size while maintaining the distortion correction setup popup window for each channel.

  • Page 55: Setting Camera Password

    Dynamic goV/fpS setup Setting camera password Dynamic GOV can be used to automatically change the length of GOV depending on the video condition. For You can change the passwords of all registered cameras at once. details, refer to the camera's help or the product's user guide. You can register the camera’s ID and password.

  • Page 56: Setting The Recording

    setup Setting the recorDing record Setup You can set the resolution and number of recordings for each channel when an event occurs or during a normal You can setup scheduled recording, event recording and other recording related settings. recording. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, record Schedule and set the transfer limit for recordings.

  • Page 57: Record Options

    ￭ Setting the eVent If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to <I-frame> recording even when the channel is configured to <Full frame> recording mode. For Key Frame recording channels, the icon for limited You can set the event-related settings such as whether or not an event is detected for each channel and whether an recording appears on the live screen's top side.

  • Page 58: Event Setup

    setup event Setup ai recognition You can configure whether or not to detect events sent by the camera for each channel and configure detailed Setup > event > event setup > ai recognition settings. ￭ AI recognition function is only available for recorder models that support AI engine function. Setup >...
  • Page 59 motion Setup > event > event setup > motion Setup > event > event setup > iVa Motion detection : You can set whether to enable motion detection. IVA : You can set whether to enable intelligent video analytics. ● ●...

  • Page 60: Event Rule Setup

    setup tampering event rule Setup You can set the event trigger and action rule to output an alarm when an event occurs. Setup > event > event setup > tampering Setup > event > event rule setup Tampering detection : You can set whether to enable tampering detection. ●...
  • Page 61 register a new event rule Item Description Video loss detection SD Card Dynamic event Example) DigitalAutoTracking, Queue, ShockDetection, MaskDetection ObjectDetection Manual trigger Video loss recovered System event (Change password, Upgrage, HDD state, Fan failure, Power On/Off, Start manual recording, End manual recording, Recording error, Account locked) 1.

  • Page 62: Alarm Input

    setup – Mobile push notification : When an event occurs, the event push notification will be displayed on the onVif Setup connected smart phone. You can set the details related to camera events registered with the ONVIF protocol. – Monitor event : When an event occurs, the screen of the corresponding channel will be displayed by switching to the live screen.

  • Page 63: Schedule

    Schedule Setting the DeVice When setting the event rule, you can set the operating time of the event action. You can make the detailed settings for devices such as storage device and monitors. Setup > event > Schedule Storage Device You can set the storage device usage and check the setting status.
  • Page 64 setup ￭ ● Storage Status : Displays the working status of a storage device. Click the <View> to display the storage status The ARB feature is available only when your video is saved in the SD card after registering your Wisenet camera using the Wisenet protocol. window.
  • Page 65 connecting the iScSi adding an iScSi device This function is only available for products that support iSCSI. For products that support iSCSI, refer to the "functions Supported by model" page. When connecting an iSCSI device to the recorder, you can search for the iSCSI device and connect and disconnect Setup >...
  • Page 66 setup raiD mode setting raiD mode setting This function is only available for products that support RAID. For products that support RAID, refer to the 1. Click on the <enable> or <Setup> button. "functions Supported by model" page. 2. In the use RAID window, select settings of RAID and click on the < oK> button. If you enable the RAID (Redundant Array of Independent Disks) mode, you can safely recover your data even if Enable : You can select whether or not to use the RAID mode.
  • Page 67 Distributed recording S.m.a.r.t This function is only available for products that support distributed recording. For products that support You can check the connection status and details of the hard disk mounted in the recorder. distributed recording, refer to the "functions Supported by model" page. Setup >...

  • Page 68: Monitor

    setup monitor extended monitor setting This function is only available for products that support the use of an extended monitor. You can set the information displayed on the monitor as well as the output system. For products that support extended monitor, refer to the "functions Supported by model" page. Setup >...

  • Page 69: Text

    Screen position setup text Some monitors many not display information (camera name, icon) about the Recording, depending on the You can set the POS device setting to send text information and text event information. condition. Then, you can change the display position of the data. Device Settings You can make detailed settings for the POS device connected to the recorder.
  • Page 70 setup registering a text Device text event Settings You can set the text to receive an alarm when an event occurs. Setup > Device > text > event Total amount : Set the condition of the total amount to be notified when a text event occurs. Check whether ●...

  • Page 71: Setting The Network

    Setting the netWorK connecting and Setting the network Networking may differ from the connection method, check your environment before setting the connection You can set various network functions, such as monitoring live video by connecting to a network from a remote location mode.

  • Page 72: Ddns & P2P

    setup Setting the Dhcp ip address of the Broadband router DDnS & p2p ● 1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the A remote user can network a recorder using a DDNS address in a dynamic IP system. If you cannot connect with a Broadband Router and enter the router's address (ex : http://192.168.1.1).
  • Page 73 ￭ connecting to the Viewer In a double NAT environment or if the router's port is not configured, the DDNS status will be displayed as <Successful>, but the DDNS connection from the viewer to the recorder may fail. ￭ You must be connected to an external network for a DDNS connection. (If there are two or more networks, be sure to connect an external to connect to the Wisenet mobile from your smartphone network to the network set as the <Default gateway>.) ￭...

  • Page 74: Ip Filtering

    setup ip filtering httpS You can prepare the list of IP addresses to allow or block access to a specific IP address. You can choose a secured connection system or install a certificate. Setup > network > ip filtering Setup > network > httpS ●...

  • Page 75: 802.1X

    802.1x When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding When an event occurs, it can be configured to send the event image to the FTP server. certificate. Setup > network > ftp 802.1x is an authentication system between a server and a client, which prevents hacking, virus infection, and information leakage of transmitted and received network data.

  • Page 76: E-Mail

    setup e-mail event Setting You can set the interval and type of the event that will be sent to the user. You can send an e-mail to a Recorder-registered user at a specific time interval, or if an event occurs. Setup >...

  • Page 77: Snmp

    Snmp Dhcp Server The SNMP protocol allows system or network administrators to remotely monitor and configure the network You can set the internal DHCP server and assign an IP address to the network camera. devices. network Setting Setup > network > Snmp Setup >...

  • Page 78: Failover

    setup checking the status to set troubleshooting You can check the IP address assigned to the current DHCP server, MAC address, and the connected network port 1. Set one recorder to <Standby> mode and the other recorder to <active> mode. information.

  • Page 79: Setting The System

    in the case of standby mode Setting the SyStem ● Device list & status : Shows the status of the normal recorder currently connected to the standby recorder. To You can set the date, language, authority, etc. displayed when using the system, and query system information or log delete the normal recorder connected, click <Delete>...

  • Page 80: User

    setup user ● Holiday : A user can select specific dates as holidays according to their own preferences. Select a holiday from the calendar displayed by clicking <Setup>. You can manage users, such as adding or deleting users and granting different authorities for each user. –...
  • Page 81 user setting if you want to register a user You can create user groups and set authorities for each group. You can manage user information such as registering and deleting users in the created user group. Setup > System > user > user 1.
  • Page 82 setup restriction Settings if the user has restricted access Set user's restricted access or network restriction. If a general user selects a menu to which they do not have access, an access restriction confirmation window will be displayed. If all rights are restricted, only the accessible menu of the live screen menu will be displayed, and Items with restrictions will require logging in for use.

  • Page 83: System Management

    System management to upgrade the current software version You can check the current system version and update to a new version, export data, setting initialization, and Setup > System > System management > product information more. checking the System information You can check the current software version and MAC address before proceeding with the upgrade.

  • Page 84: Log

    setup Settings Power down : If the power is off, the first alarm is generated. Select the <use the alarm output no. 1 when the ● device power is off> check box and click <apply> to clear all alarms set for alarm output 1, and then selecting You can export the information set in the recorder to a storage device and apply the same information to other alarm 1 with another alarm out will not be possible.
  • Page 85 checking the event log checking the export log You can search recorded events including alarms, camera events and video loss. You can search the user who performed the export and the execution time and details (time, channel, device, file It also shows the log and its timestamp. type).

  • Page 86: What Is Web Viewer

    starting web viewer What is Web VieWer? ConneCting Web VieWer Web Viewer is a software program with which the operator can access a remote Recorder for real-time monitoring, PTZ 1. Open your web browser and type the IP address or URL of Recorder into the URL address box. control (if configured) or search.

  • Page 87: Set The Recorder Password

    set the reCorder PassWord 2. Set the video recording method on the <storage> screen, and then click <next>. After factory reset, the password must be set for the recorder to access the web viewer. Enter the password of the admin account, and click <Login>. ●...

  • Page 88: Camera Setup

    starting web viewer 4. Set the network connection type and the connection environment on the <network> screen, and then click the 7. On the <easy connect> screen, a remote user can network a recorder in a dynamic IP system. <next> button. Click <enable>...

  • Page 89: Screen Layout Of The Live Viewer

    The ID of the connected user is displayed. Event list Shows a list of events that occurred on the camera. You are directly connected to the Hanwha Vision homepage (www.HanwhaVision.com). Layout list Displays the default layout and a list of created layouts.

  • Page 90: Checking The System Status

    live viewer CheCking the systeM status CheCking CaMera List The icon at the top of the screen indicates the status of the system. Displays the camera type, status, and name registered in the recorder. Name Description Live > List Displayed when a problem occurs with the pan or recording status. Displayed when an error occurs in the power supply.

  • Page 91: Checking The All Camera Status

    CheCking the aLL CaMera status network status Click the < > button, followed by the <network> tab. You can check the status of all cameras connected to the recorder. You can check the status of network bandwidth currently being received/transmitted. Live status Click the <...

  • Page 92: Changing Overall Channel Aspect Ratio

    live viewer Changing the Pattern oF sPLit sCreen Changing oVeraLL ChanneL asPeCt ratio Click the < > button and select the desired split screen. Video screen ratio for all channels can be changed in live split screen mode. The selected split screen is applied to the video window. Click <...

  • Page 93: Full Screen Mode

    FuLL sCreen Mode setting uP the LiVe Layout You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

  • Page 94: Change Of Layout Channel And Name

    live viewer Change of Layout Channel and name reaL-tiMe eVent Monitoring Real-time events that occurred on the camera can be checked in the live video window and event list. 1. Click < > after selecting a layout. ￭ AI events are only available for products that support AI. 2.
  • Page 95 event search alarm input filter Displays the only events for the alarm input numbers of the selected recorder. You can search events by camera, alarm input (recorder), and event type. To search for a specific event, click < > to select the event type and camera to browse. event filter Displays only selected events in the event list.

  • Page 96: Event Instant Viewer

    live viewer event instant Viewer LiVe sCreen Menu Select an event to check from the event list, and click < > to play the recorded video at the time the event After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. occurred.

  • Page 97: Camera Video Control

    CaMera Video ControL instant Viewer During monitoring, you can rewind 1 minute before playback. By using the function icon in the video window, you can easily enable functions such as screenshot, video rotation, and PTZ control. Select the desired channel and click < >.

  • Page 98: Ptz Mode

    live viewer Ptz Mode zoom in You can run PTZ control of the selected channel. You can zoom in or out using the mouse wheel. Select the desired channel and click < >. If you scroll up using the mouse wheel, the selected video screen is enlarged by 10%, and a thumbnail window is displayed.

  • Page 99: Channel Aspect Ratio

    Channel aspect ratio Ptz ControL You can change the aspect ratio of each channel. Ptz Control Menu Select the desired channel and click < >. If the connected network camera is a PTZ camera, the < > icon is displayed in the camera list. When the It changes to the actual proportion of the video.

  • Page 100: Using Digital Ptz (D-Ptz) Function

    live viewer using digital Ptz (d-Ptz) function to delete a registered preset 1. Click < >. 1. Register a camera that supports the D-PTZ profile. ￭ 2. Select the preset to delete, and click <delete>. In cameras that support the D-PTZ profile, you can use the D-PTZ function. 2.

  • Page 101: Exporting Video

    exPorting Video You can export the recorded video by manually inputting the desired channel, date, and time. 1. Click the < > button. 2. Select a layout to export and select the desired channel. 3. Set the start date/time and end date/time. ￭...

  • Page 102: Screen Layout Of The Search Viewer

    search viewer tiMe searCh You can search and play the recorded video stored in the recorder by connecting the recorder remotely. You can search the recorded data by the desired date and time conditions. sCreen Layout oF the searCh VieWer ￭...

  • Page 103: Event Search

    eVent searCh text searCh You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <search> menu. 1. Select < text search> in the <search> menu. 2.

  • Page 104: Bookmark Search

    search viewer bookMark searCh searCh resuLts exPort You can search for bookmarked data. Search results of events, texts and bookmarks can be exported to a file. example) bookmark search result export 1. Click < > in the search results list. 1.

  • Page 105: Screen Layout Of The Ai Search Viewer

    AI search viewer Person searCh If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. ￭ In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. This function is not supported in some models.

  • Page 106: Face Search

    AI search viewer FaCe searCh VehiCLe searCh From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1.

  • Page 107: Lp Search

    LP searCh LPr searCh You can search for vehicle license plates from the recorded data. You can search for the license plate number recognized in the recorded data. ￭ LPR search is only available on recorder models that support AI recognition. 1.

  • Page 108: Search Results Export

    AI search viewer searCh resuLts exPort Search results such as people, faces, and vehicles can be exported to a file. example) Person search results export 1. Click < > in the search results list. 2. Select the desired list and click <ok>. ￭...

  • Page 109: To Adjust The Time Line

    play PLay searCh resuLts exPort Video by seCtion setuP You can play the recorded data and export the video you want during playback. You can select the desired section from the time line or search list during video playing and export it to a file. 1.

  • Page 110: Play Button Name And Function

    play Play button name and Function Paused state Playback state Name Description Previous event Go to the previous event video. Previous frame Moves backward to the key frame (I-frame). Playback Play the video. Next frame Moves forward one frame or more. Next event Go to the next event video.

  • Page 111: Setup Viewer

    setup viewer setting the CaMera You can configure the Recorder settings remotely on the network. You can check a list of cameras that are connected to the Recorder and configure the necessary settings. sCreen Layout oF the setuP VieWer For details, refer to the "setup > setting the Camera" page in the Table of Contents. Channel setup You can register a network camera for each channel and make a connection between them.

  • Page 112: Profile Setup

    setup viewer When you click the <Camera webviewer> button, a new camera web browser window is opened. Profile setup ● – This is not supported if the camera is connected to the RTSP protocol. You can set the profile for a network camera. –...

  • Page 113: Camera Password

    remote setting the reCording You can set the video profile transmitted to the network and the expansion monitor. For details, refer to the "setup > setting the recording" page in the Table of Contents. record schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. setup >...

  • Page 114: Record Options

    setup viewer record options setting the eVent You can set the hard disk recording option. For details, refer to the "setup > setting the event" page in the Table of Contents. ￭ You can set the recording duration separately for each channel. ai engine setup >...
  • Page 115 ai recognition Motion detection You can change the AI recognition event setup. You can change the settings for motion detection events. ￭ ￭ Settings and operating specifications may differ depending on the recorder model and camera. Detailed video analysis can be set by accessing the Camera webviewer. Mask detection You can change the mask detection event setup.

  • Page 116: Event Rule Setup

    setup viewer tampering detection event rule setup You can change the tampering detection event setup. You can set the event trigger and action rule to output an alarm when an event occurs. setup > event > event rule setup Video loss detection You can change the video loss detection event setup.

  • Page 117: Onvif Setup

    onViF setup setting the deViCe You can set the camera registered with the Onvif protocol. You can check a list of devices that are connected to the Recorder and configure the necessary settings. For details, refer to the "setup > setting the device" page in the Table of Contents. setup >...

  • Page 118: Monitor

    setup viewer raid s.M.a.r.t This function is only available for products that support RAID. You can check the connection status and details of the hard disk mounted in the recorder. (Refer to the "Functions supported by Model" page.) You can set the RAID (Redundant Array of Independent Disks) mode. Monitor You can set the information displayed on the monitor as well as the output system.

  • Page 119: Text

    text setting the netWork You can set the POS device text display and event text settings. For details, refer to the "setup > setting the network" page in the Table of Contents. setup > device > text iP & Port device A remote user can access the Recorder via the network to check the current mode and the IP address.

  • Page 120: Ddns & P2P

    setup viewer ddns & P2P httPs A remote user can network a recorder using a DDNS address in a dynamic IP system. If you cannot connect with a You can select a security connection system or install public certificates. dynamic IP, you can easily access using a P2P service. setup >...
  • Page 121 event You can set the event interval and specify which events the server sends mails for. When an event occurs, you can create settings related to the FTP server to which images will be transferred. setup > network > FtP recipient You can set groups and recipients to receive emails.

  • Page 122: Dhcp Server

    setup viewer snMP status You can check the IP and MAC currently used through the DHCP server, and the connected network port. Using the SNMP protocol, the system or network administrator can remotely monitoring the network devices and sets the environment. setup >...

  • Page 123: Setting The System

    setting the systeM user You can manage users, such as adding or deleting users and granting different authorities for each user. You can configure the various settings of the Recorder system. For details, refer to the "setup > setting the system" page in the Table of Contents. setup >...

  • Page 124: System Management

    setup viewer restriction settings settings You can set the user permission. Using a storage device, you can apply the current configuration of Recorder to another Recorder. Press the Initialization button to return the network settings to their factory default state. Items in the <exception>...
  • Page 125 event log The event log lists recorded events, such as sensor events, camera events, or image losses. export log You can search the user who performed the export and the execution time and details (time, channel, device, file type). English _125...

  • Page 126: Export Viewer

    export viewer seC baCkuP VieWer screen Layout of the backup Viewer You can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer, the backup data file will be played. XRN-1620B2_CAM 01 2020-05-14 20 :54 :13 recommended system requirements...
  • Page 127 Name Description Saves the current video's image as in an image file. Supports JPEG file format. Screen Printout Prints out the current screen. You should have installed the appropriate printer driver before you can print out the screen. A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated.

  • Page 128: Appendix

    appendix use JoystiCk using VirtuaL keyboard The function is only available for the product that supports a joystick. For products that support joysticks, refer to the "Functions supported by Model" page. The SPC-2000/2001 joystick is operated as follows : 1. For alphanumeric inputs, the virtual keyboard window appears. 2.

  • Page 129: Troubleshooting

    troubLeshooting Problem Action Problem Action The camera is not connected or the PC fails to connect to the ● Check if the network cable is connected properly. The frame number set for multiple data transmission set in camera or network environment Live video will be slow or cut off.
  • Page 130 appendix Problem Action Problem Action Exported data cannot be played on a PC or recorder. ● When setting the file format for exporting, first decide whether the device to be played is a PC ● If the sum of input data for each channel exceeds the limit, the alarm icon and the pop up In the live screen, the <...

This manual is also suitable for:

Xrn-6410rb2Xrn-6410b2Xrn-3210b2Xrn-1620sb1Xrn-1620b2Prn-1600b2 ... Show all

Table of Contents