Table of Contents
Advertisement
Operation of remote control unit
In addition to the remote control of the receiver unit, the provided remote
control unit can control
a KENWOOD
cassette tape deck, CD player, turnta-
ble, graphic equalizer, etc., connected
via the KENWOOD
system
control
EB
Loading
batteries
cords.
1 Remove the cover.
Insert two AA-size (R6/SUM-
3) batteries
as
indicated by
the polarity marking.
CD player
1
ay a
——
ee t=
3 Close the cover.
2
L
@ Operation procedure
Plug the power cord of the system into an AC wall outlet, and
press the [POWER]
key on the remote control unit to turn the
ace cone ee stad
on
e main
system
power on.
When the power is turned on, press the key of the source com-
ponent to be operated.
@ When
two operation
keys on the remote
control
unit are
pressed successively, press each key securely reserving an
interval of more than 1 second for each press.
@ Be sure to read the instruction manuals of the components
connected via the system control cords.
Remote
control unit
Operating range
Notes:
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets oter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the fight of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In
such a case, change the system installation position to prevent the malfunction.
12 KR-vgoa0 (En)
Advertisement
Table of Contents
