Programmed Play - Kenwood DP-R4450 Instruction Manual

Programmed play (PGM mode}
The program mode allows you to play desired tracks in the order you want to hear them. A maximum of 20 selections can
be entered in memory.
M@ Playing desired tracks in desired order
4. Start playback.
1 Press the STOP key.
@ if one of the skip keys ( [i] or [Fed] ) is pressed during pro- |
grammed playback, the track being played is skipped in the |
forward or reverse direction.
2 Enter the PGM mode.
indicator lights up.
1 #@ @ 44 &
B Ff @ @ 18
11°%R 43 4 48
16 #17 18 «#12 26
To check the programmed order
indicator lights up. |
Display showing program No, 12, DISC 3, track
No. 7.
: 3 Program desired tracks in desired order.
Example: Select track 5 on DISC 4.
@ Select the disc.
e Every time the key is pressed, the track No. and the
order it was programmed (P-No.) are displayed in the order of §
programming. :
@ The previous display will resume in a few seconds.
@) Select the ics number.
7
NY
To resume normal playback
P.MODE
Remote control numeric keys
After selecting the track with
the [Kea] , [>i] keys, press
the key.
@ The playback in the order of the track Nos. on CD will start after
the track being played.
SNGLE TME
sa
oad TAAGH ND
si v
©@eoo0U5 P-Z!
Track number
@ By repeating steps CD and @, up to twenty tracks may be se-
lected.
e |f you made a mistake, press the [CLEAR] key and select the
correct track.
@ By pressing the (P,MODE| key without selecting track numbers,
all the tracks on the disc selected in step @ will be programmed.
To stop programmed playback
1 2 @ 44 5
6 F G@ 8 1D
SoAL. P-G lwo wan
Vig SINGLE TIME
12 pp-Ra4s50 (En)