Kenwood 1090VR Instruction Manual page 46

JO4juog ajoway
23
@ Hold down the ENT key until the backlight flashes twice.
@ Select the component to be deleted.
Press the VIDEO, AUDIO, or TV key repeatedly to select the
desired component.
© Enter the 3 digit code "991".
O Hold down the ENT key until the backlight flashes twice.
ARO a PN NN ARONA ARC, ee RCI RI RS AON RE Checking a setup code
@ Hold down the ENT key until the backlight flashes twice.
| @ Select the component with setup code you want to check.
i Press the VIDEO, AUDIO, or TV key repeatedly to select the
| desired component.
| @ Enter the 3 digit code "990".
O Press the 1 key and count the number of times the backlight
blinks. This is the first number of the 4 digit setup code.
@ Press the 2 key and count the number of times the backlight
blinks. This is the second number of the 4 digit setup code.
O Press the 3 key and count the number of times the backlight
blinks. This is the third number of the 4 digit setup code.
@ Press the 4 key and count the number of times the backlight
blinks. This is the fourth number of the 4 digit setup code.
SS ee Ss
N E SERA ARATE A HR RING TTETNIE AE SY
*At this time all inputs become available regardiess of any earlier
registration. :
e Exampie 1 : To delete the registration of the component connected to
the VIDEO 1 jacks, select "VIDEO 1".
any
G
(ig Perform each step within 5 seconds.
ee ee
¢ The backlight flashes twice immediately after the "0" 1s input to confirm
input 3
¢ lf the backlight does not blink, the first-digit in the setup code ts 0.
elf the backlight does not blink, the second digit in the setup code Is 0.
If the backlight does not blink, the third digit in the setup code ts 0.
lf the backlight does not blink, the fourth digit in the setup code !s 0
Re
G¥F a
"e
Perform each step within 5 seconds.