Table of Contents
Advertisement
KR-V7060
Make connection as shown below.
When connecting the related system components, refer also to the instruction manuals of the related components.
Do not plug in the power lead until all connections are completed.
LD Player or VIDEO DECK 2
Monitor TV
AC outlets
For other countries ex-
cept for the
U.S.A,
Mexico and Canada
Audio cut
| Video out
Video in
Video out
Audio out | f f Audio in
|
Audio cord
rane Oo= may
a
eli: 2
© (ow
ses am
To AC
outlet
+
+
Lamat
FRONT 3? RS
| Rett
a
Tape deck 2
oO
Turntable
©) ©) a
CD player
eystem
N V
Brae
nee
® ©
> Eo
SYSTEM
Tape deck 1
A
eee
Y
if
@ This unit has a cooling fan on the rear aie Do not Cee ange near the loth fan.
Automatic operation
When this unit is connected to KENWOOD system components such as @ cassette deck and CD player through system control cords and the input
source is selected with the INPUT SELECTOR, the selected component starts to play automatically, Inversely, playing a component automatically
selects that source as the input to this unit. The automatic operation also occurs when the provided remote control is used.
1. Connect all cords firmly. lf connections are loose, there could be loss _of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
3. De not connect up a power source which is larger than that jndicated on the socket at the rear of the unit.
4. Insert the system control plugs completely into the jacks.
5. lf the system control cords or audio cords are not connected properly, the remote control or automatic operation between system
components will not work properly.
Advertisement
Table of Contents
