Mute A Hoot Service; Clearing A Hoot Service - Speakerbus iD712 User Manual

iD712 User Guide
• Requires talk permissions to talk back to voice services. For more information, please contact your
System Administrator.
• Latching is configured by your System Administrator.
• If your System Administrator has enabled latched hoot timeout, and no speech is detected after a
defined time, an audible warning is sounded before the hoot is disconnected.
To talk back to a hoot service:
1. Press and hold down *T (where applicable).
Or if latching has been enabled by your System Administrator.
Press *T to talk. Press *T when finished talking.

Mute a Hoot Service

To mute a hoot service:
1. Press f3 (MUTE VS).
2. Press f3 (UN-MUTE) again to remove mute.

Clearing a Hoot Service

To clear a hoot service:
1. Press f1 (MENU) to display Main.
2. Press f4 (NEXT>) to display Program.
3. Ensure Clear Voice Service is highlighted and press OK.
46
Voice Services