Install Main Battery - Motorola MC31 Series Integrator Manual

Install Main Battery

If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged,
see Battery Charging on page
To install the main battery:
Remove the battery door.
1.
Insert the battery into the slot, bottom first and press the battery gently into the slot. The battery clip locks the
2.
battery into place.
Insert Battery
Figure 1-7
With the latches in the open position, replace the battery door, top first and press to close.
3.
Insert Battery Door
Figure 1-8
Rotate the latches (to the lock position) to lock the door in place.
4.
1-8. To remove the main battery, see
Battery
Door
Latches
Getting Started
Main Battery Removal on page
1 - 7
1-15.