Advertisement
Advertisement
Table of Contents
Related Manuals for Inkbird IBT-26S 5G
Summary of Contents for Inkbird IBT-26S 5G
- Page 1 Bluetooth &Wi-Fi Smart BBQ Thermometer IBT-26S 5G...
-
Page 3: Table Of Contents
CONTENTS Overview Features & Specifications Product Introduction Wireless Connection Battery Precautions Bluetooth/Wi-Fi Specs Product Accessories FAQs FCC Requirement Product Warranty... -
Page 4: Overview
01 Overview This smart BBQ thermometer comes with six tempera- ture probes to measure the temperature of multiple foods and the oven temperature simultaneously. It features Bluetooth and Wi-Fi capabilities that allow us to control and monitor grilling from a smartphone. With the help of its temperature alarms and several smart functions, we can always grill aromatic, juicy, and delicious meats. - Page 5 trigger mode. Alarm Interval: Settable in repeat trigger mode Probe Connector: Jack 2.5mm mono plug 11mm。 Number of Probe Channels: 6. Probe short time measurement temperature range: -20 。 Probe Continuous Monitoring temperature range: -30 。 Probe Temperature accuracy: （maximum） （maximum）...
-
Page 6: Product Introduction
03 Product Introduction USB Type-C Port Battery Bluetooth State Wi-Fi State State Alarm Mute Probe /ON state Number Temperature Unit Current Temperature High and Low Temperature Ambient/ Alarm Oven Timer Temperature Probe Ports... - Page 7 Display Icon Reference Alarm Mute. Alarm sound ON. Wi-Fi is disabled. Wi-Fi is connected to the router always on and can access the network. Wi-Fi is connected to the router but cannot access the network. Wi-Fi is paired with the network but disappeared cannot connect to the wireless router.
- Page 8 20%~39% of Battery level. flash 0%~19% of Battery level. Current temperature over Preset flash temperature alarm warning. Current temperature below Preset flash temperature alarm warning. The probe temperature exceeds 300℃ or 572℉. The probe temperature is below -30℃ or -22℉. flash Timer alarming Power Button Instructions...
-
Page 9: Wireless Connection
04 Wireless Connection 1.Download the INKBIRD App Search the INKBIRD App from Google Play or App Store to get it for free, or you can scan the QR code below to download it directly. Scan QR code to download... - Page 10 (c) Registering an account is necessary before using the INKBIRD app for the first time. 2.Bluetooth Pairing Step1: Open the app and click “+” in the upper right corner to select IBT-26S to start the connection.
- Page 12 Step2: Turn on the device and click "NEXT STEP" to continue.
- Page 13 Step3: Make sure your smartphone has Bluetooth enabled, then click "NEXT STEP" to continue.
- Page 14 Step4: The app will automatically search for the device. Once the device is found, press the power button on the device to complete the pairing.
- Page 16 Step5: Select "Later" to complete Bluetooth pairing or click "Continue" to connect to Wi-Fi.
- Page 17 3.Wi-Fi Pairing If you choose to continue connecting to Wi-Fi in step 5, enter the Wi-Fi network name and password, then click "Confirm" to complete Wi-Fi pairing. Note that the 2.4GHz version should choose a 2.4Ghz Wi-Fi network, and the 5GHz version should choose a 5Ghz Wi-Fi network.
-
Page 20: Battery Precautions
Notes: (a) Location services on the smartphone must be turned on during connection. In addition, the app needs permission to access location information. Otherwise, you will not be able to establish a Bluetooth/Wi-Fi connection. (b) Keep the smartphone, device, and router as close together as possible to set up a connection. - Page 21 Bluetooth connection without Wi-Fi enabled allows for longer battery life. Disabling Wi-Fi and no Bluetooth pairing can achieve a super long battery life. 3.Use a standard USB Type-C 2.0/3.0 data cable to charge the device. 4.Use a 5V 1A USB power adaptor to charge the device. In an environment of 23℃, the battery can be charged up to 45% within 60 minutes, and up to 80% within 120 minutes.
-
Page 22: Bluetooth/Wi-Fi Specs
longer be recharged. Conversely, storing the device with its battery fully charged may reduce battery capacity and shorten battery life. If you plan to store the device for more than six months, you should charge it to 50% battery capacity every six months and store it at a temperature between 0 ℃... - Page 23 Number of 1-14@2.4GHz (CH1-11 for US/CA, Channels CH1-13 for EU/CN） 802.11b: 1, 2, 5.5, 11Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, Data Rate 54Mbps WIFI 802.11n: HT20 MCS0-7, HT40 MCS0-7 WEP/WPA/WPA2/WPA2 PSK Security （AES） WPA3 Maximum output power Maximum gain 2dBi@2.4G，2.6dBi@5G Notes:...
- Page 24 reset. After a Wi-Fi reset, if the device shuts down in the middle, once it restarts, it will also automatically restore the Wi-Fi network that was paired before the reset. If you want to remove the network configuration information, you can remove it through the App, so the device will not restore and reconnect to the Wi-Fi network that was paired before the reset.
-
Page 25: Product Accessories
purchase time, phone model, phone OS version, app version, device virtual ID, and screenshots/videos (if you have any). The more information we have, the faster we can help you solve your problem. 07 Product Accessories USB 2.0 Type-A to USB 2.0 Type-C charge cable，Type-C plug Connect to the device. -
Page 26: Faqs
To fix temperature probes for more accurate detection. NOTE: Accessory quantities vary with the SKUs/ configuration of the product 3x Probe Clamps purchased. 08 FAQs Q: Why it is failed to connect to Wi-Fi network? (e) When the Wi-Fi icon on the device screen is flashing, it means the device is in network configuation. -
Page 27: Fcc Requirement
(k) Try connecting in another network configuration mode. (l) Restart the device and router, then try again. Q: Can I access the current temperature from anywhere in the world thanks to Wi-Fi as long as I have an internet connection? A: Yes, as long as your phone has access to the Internet, that's fine. - Page 28 authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 29: Product Warranty
10 Product Warranty This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge. - Page 31 INKBIRD TECH.C.L. support@inkbird.com Factory address: 6th Floor, Building 713, Pengji Liantang Industrial Area, NO.2 Pengxing Road, Luohu District, Shenzhen, China Office address: Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China V1.0...
Need help?
Do you have a question about the IBT-26S 5G and is the answer not in the manual?
Questions and answers
I cannot connect via Bluetooth because I don't have the passcode. The two suggestions do not allow connection
The Inkbird IBT-26S 5G can only be connected via Bluetooth through the INKBIRD app. It cannot be connected directly through the mobile phone or tablet's Bluetooth settings page. To connect without a passcode, install the INKBIRD app and use it to pair the device.
This answer is automatically generated