Table of Contents
Advertisement
1
PRODUCT AND INSTALLATION MANUAL
Whole Home Water Filtration Systems
Model NuMbers:
Whole Home Water Filtration & Conditioning systems:
eWs-sPeCTruM-V2, eWs-1465-V2, eWs-1035-V2
Whole Home Water Filtration systems:
CWl-sPeCTruM-V2, CWl-1465-V2, CWl-1035-V2
Retain this Product & Installation Manual
for Helpful Information
Please Register Your System
Revised 1/01/2022 V: 2.0
Advertisement
Table of Contents
Related Manuals for Environmental Water Systems EWS-SPECTRUM-V2
Summary of Contents for Environmental Water Systems EWS-SPECTRUM-V2
- Page 1 PRODUCT AND INSTALLATION MANUAL Whole Home Water Filtration Systems Model NuMbers: Whole Home Water Filtration & Conditioning systems: eWs-sPeCTruM-V2, eWs-1465-V2, eWs-1035-V2 Whole Home Water Filtration systems: CWl-sPeCTruM-V2, CWl-1465-V2, CWl-1035-V2 Retain this Product & Installation Manual for Helpful Information Please Register Your System...
-
Page 2: Simple Steps For A Correct Installation And Happy Customer
If you don’t read this service guide at least read these 8 simple steps SIMPLe STePS FOR A CORReCT INSTALLATION AND A HAPPY CUSTOMeR set up system and install it on the main water supply coming into the home Page 7-9 outlet Correct Use corrugated flexible stainless or some other flexible piping... -
Page 3: Installation Dimensions For Commom Spectrum And Smaller 1035 Systems
For Illustration Purposes Only: Tank, valve and all contents (as pictured below) for these systems are delivered fully assembled. Electric transformer, bypass and supplied adaptors - some assembly required. Pictured: Pictured: eWs-sPeCTruM-V2 eWs-1035-V2 CWl-sPeCTruM-V2 CWl-1035-V2 specialty systems for condos or townhomes based on limited space and water usage depth: minimum 22”... -
Page 4: Installation Dimensions For Larger 1465 Systems
installation dimensions - Model #’s eWs-1465-V2, CWl-1465-V2 For Illustration Purposes Only: On-Site Assembly Required due to shipping weight for all larger systems, tank, all tank contents and valve must be assembled on site. Please review the simple steps for proper assembly. Pictured: eWs-CC-1465-V2 CWl-CC-1465-V2... -
Page 5: On Site Assembly Procedure For Larger 1465 System
assembly instructions for eWS/CWL-1465-V2 systems THeRe SHOULD Be 6 BOxeS -- CHeCk TO See IF YOU HAVe ALL THe BOxeS BeFORe ASSeMBLY Model #’s EWS-1465 and CWL-1465 should have 6 boxes. ______________________________________________________ 1 Box - Tall with 14” x 65” Tank with a Capped Riser Tube (or ICN (2) Riser Manifold - EWS Series only) inside and Tank Wrap ... -
Page 6: Table Of Contents
table of contents SIMPLe STePS FOR A CORReCT INSTALLATION AND HAPPY CUSTOMeR ......INSTALLATION DIMeNSIONS FOR COMMOM SPeCTRUM AND SMALLeR 1035 SYSTeMS ..INSTALLATION DIMeNSIONS FOR LARGeR 1465 SYSTeMS ............ON SITe ASSeMBLY PROCeDURe FOR LARGeR 1465 SYSTeM ............IMPORTANT SAFeTY INFORMATION – All Systems Instructions Before Using ...................... -
Page 7: Important Safety Information - All Systems
IMPORTANT SAFeTY INFORMATION - ALL SYSTeMS CAUTION: Read and follow the information in this manual to minimize the risk of electric shock or personal injury. IMPORTANT! If you are unsure about the installation of your system, contact EWS customer service or consult a professional plumber. IMPORTANT! This system must be installed in compliance with applicable state and local codes, law, and regulations. -
Page 8: Location And Setup - All Systems
location and setup UNPACkING AND INSPeCTION - Check the system components for damage or missing parts. WHeRe TO INSTALL THe SYSTeM Place system on the main water supply in order to supply filtered water to the entire home. Place the system where you want to install the unit. Whether inside or outside, make sure the unit is level and on a firm base. ... -
Page 9: Plumbing Connections
installation instructions - all filter systems INSTALLATION Turn off gas or electric supply to the water heater(s). Turn off the main water supply. Open a hot and cold faucet to drain house water pipes. NOTe: Keep those hot and cold faucets open until these instructions tell you to close. Move the assembled system into installation position and check that Valve is securely fastened to the Tank. - Page 10 installation Instructions - all filter systems - plumbing connections Locate water line or pipe to be cut and make sure of direction of water flow. CAUTION: Do not cross-connect or plumb backwards. Make sure of the direction of water flow from cut pipe to be connected.
-
Page 11: Drain Line
installation Instructions - all systems - drain connections and air gap A word about the proper installtion of a drain line. It appears simple, but simple mistakes can create many problems associated with this or any system. Please read the instructions below to avoid any issues. PLUMB THe DRAIN LINe WITH AN AIR GAP Plumb rigid tubing only (PVC recommended if code applicable) directly to the 3/4”... -
Page 12: Electrical Connection
installation Instructions - all systems - electrical connections INSTALL eLeCTRICAL CONNeCTION Plug system into a standard grounded, unswitched 110/115/120v electrical outlet. If outlet is over 15 feet away use 18 gauge extension cord to connect up to 100 feet away. Do not exceed 100 feet. -
Page 13: Clear The Plumbing Lines
installation Instructions - clear the plumbing lines, begin to fill, set time IMPORTANT - CLeAR THe PLUMBING LINeS AND CONNeCTIONS BeFORe START-UP Keep the inlet and outlet closed to and from the system - Turn on main water supply - Go to a tub (best) or the nearest faucet, remove aerator and run water through the plumbing system and through your plumbing connections before opening the inlet to the system or beginning the start up procedure - Now that lines have been cleared, shut off water to the tub or faucet and follow start up procedures WARNING:... -
Page 14: Tank Fill Slowly
flush the system and what the system is doing START UP TO FLUSH THe SYSTeM bACKWAsH NoTe: 13. Press and hold the ReGeN Button until the 10:00 screen turns GReeN and reads BACkWASH 10:00 day & Time are the only changes needed. -
Page 15: Last Steps Before Leaving The System
check the drain water and put system in service OBSeRVe THe DRAIN WATeR DURING CYCLe 2. RINSe IF THe WATeR IS RUNNING CLeAR - PROCeeD TO STeP #17. IF THe WATeR ReMAINS GReY BeGIN ANOTHeR SYSTeM FLUSH look for clear minimum water coming 1”... -
Page 16: System Ready For Use
flush water through home - check your work - send it into backwash SYSTeM IS ReADY FOR USe Turn on gas or electric supply to the water heater(s). PLeASe FLUSH ALL THe WATeR THROUGHOUT THe HOMe open as many hot and cold faucets through out the home as possible, remove the aerators or any restriction at the end of the faucets, run tubs, flush toilets,... - Page 17 left blank...
-
Page 18: Product Blow-Out (For Illustration Purposes)
parts breakdown - eWS/CWL-Spectrum-V2, eWS/CWL-1465-V2, eWS/CWL-1035-V2 For illustration purposes only. Measurements and weights may vary slightly and EWS reserves the right to modify parts and product. Adaptor 1”: Most Common Valve - Outlet Side Valve - Inlet Side Drain Adaptor (DLFC) direct threaded attachment to 3/4”... -
Page 19: Warranty
Warranty Notification - As Published and Available Online Notification: This warranty is referenced by EWS, Inc. in all literature, addressed in General Terms and Standard Conditions of Sale, and is published in its entirety in all EWS, Inc. product manuals, websites, and in all service guides supplied with all product. Limited Warranty: EWS, Inc., a Nevada corporation, hereby warrants all products to the original consumer purchaser to be free from defects in material and workmanship as stated in the following paragraphs:... -
Page 20: Back Cover With Ews Contact Information
Thanks - we appreciate you. EWS Logo and Environmental Water Systems are Registered Trademarks and the Property of EWS, Inc.
Need help?
Do you have a question about the EWS-SPECTRUM-V2 and is the answer not in the manual?
Questions and answers