Device Components - Lanaform Nail Lamp Manual

consult your doctor before using
the NAIL LAMP.
• Do not look at the UV lamp
directly.
• If you experience any pain when
using this equipment, stop using
it immediately and consult your
doctor.
• Keep children away from the
packaging materials. They could
suffocate.
• Excessive exposure to UV rays
can cause sunburn. Over-frequent
exposure to UV rays causes skin
to age and increases the risk of
skin cancer.
• Over-exposure to UV rays can
cause damage to the skin or eyes.
If you notice changes on your skin,
consult a doctor.
• If you know you are allergic
to UV rays, consult your doctor
before using the device.
• Only use the type of lighting
that has been recommended.
E-IM-NailLamp-Lot003.indd 5 E-IM-NailLamp-Lot003.indd 5
Failure to follow these instruc-
tions may void the warranty.

DEVICE COMPONENTS

(see illustrations at the
beginning of the instructions
for use):
1 LED lights
2 ON/OFF button
3 and 4: Timer button 30 (3)
or 60 (4) seconds
5 Nail Lamp device
6 AC adapter
Using the device
1 Place the device on a stable, flat
and dry surface.
2 Connect the adapter to the
socket located on the product.
3 Select the drying time: 30 (LED
gel polish) or 60 (UV gel polish)
seconds. If you go through this
stage, the timer will immediately
be set at 99 seconds.
4 Place your hand or foot under
EN
FR NL DE SL HR
the device and the infrared
sensors will detect it and initiate
drying
Maintenance
• Unplug the device and allow it
to cool before cleaning it.
• Do not immerse the device in
liquid to clean it.
• Use a gentle detergent. Pat dry
with a dry, clean cloth.
• Never use abrasive cleaners, a
brush, glass or furniture cleaning
products or paint thinner.
Storage
Store the device in its box in a
•
safe, dry, cool place.
• Do not put the device in contact
with sharp or pointed items that
might damage the outer surface.
• Do not wrap the power cable
round the device. (This may
cause wear and tear and break
the cable).
"Nail Lamp"
5
/ 24
07-02-23 14:56:33 07-02-23 14:56:33