Setting The Temperature; Checking The Error List When An Error Occurs - Fujitsu Airstage UTY-DTGYZ1 Manual

1-1-12

Setting the temperature

● Set the temperature on "Monitor Mode" screen.
Select the relevant R.C.Groups / Groups from R.C.Group / Group on "Monitor Mode" screen.
a
The R.C.Groups / Groups become the selected state (blue).
¡
Click "Set Temp." button.
b
Click the temperature you want to set.
c
The temperature is set.
¡
1-1-13

Checking the error list when an error occurs

When an error occurs, "Error List" window opens at the bottom of monitor mode screen.
a
Note
The 3 items "Name", "Address", and "Error Code" are displayed in "Error List" window. The items are displayed in both "Icon"
Display and "List" Display. However, if there is not even 1 error, "Error List" window is not displayed.
When there is a display hidden at the top or bottom of "Error List" window, scroll the list display up or down by clicking "ˮ
b
or "ˮ button.
To close "Error List" window, click "Close" button.
c
Monitor Mode (Icon) / Error List
Monitor Mode (List) / Error List
En-13
1
3
2
1
2
3