Table of Contents
Advertisement
NOTICE
Do not ride through deep water, oth-
erwise the engine may be damaged.
Avoid puddles because they may be
deeper than expected.
TIP
If the battery voltage is less than 11.50
volts, charge the battery.
Operation and important riding points
EAUV1690
Shifting
ECAN0072
1
1. Shift pedal
2. Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc. When shifting gears, fully return
the throttle grip. The use of the shift
pedal is shown in the illustration.
TIP
The transmission cannot be shifted
from 4th gear to neutral when the en-
gine is running.
EAU37552
NOTICE
When shifting, press the shift
4
3
2
1
Even with the transmission in
N
2
Be sure to fully close the throttle
6-3
pedal firmly until you feel the
gear shift is complete.
the neutral position, do not
coast for long periods of time
with the engine off, nor tow the
motorcycle for long distances.
The transmission is properly lu-
bricated only when the engine is
running. Inadequate lubrication
may damage the transmission.
grip when shifting.
ECA15182
6
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the PG-1 and is the answer not in the manual?
Questions and answers
My PG 1 when I ride speed more than 40km per hour it noise from engine
The Yamaha PG-1 experiences engine noise when riding over 40 km/h due to engine vibration, which becomes more noticeable when the throttle is wide open. Additionally, the road noise from the 50-50 knobby tires contributes to the overall sound, similar to driving a 4WD with mud tires.
This answer is automatically generated
what is the correct tire presure for pg 1 with pillion