Microphone Up/Dwn Switch - Kenwood TR-851A Instruction Manual

4-9. MICROPHONE UP/DWN SWITCH
The microphone UP/DWN switches are capable of
performing two functions. These switches can also
be used to alternate between MR and VFO modes or
to initiate channel linkage. The chart below
describes how to use those function.
Function |
Operation
UP switch
OWN switch
A
Press the FUNC
and then the 5 | The UP switch will move the frequency | The OWN
switch will move the fre-
key. up. {Normal operation) quency down. (Normal! operation)
B Press the FUNC
and then the O | The UP switch will now allow you to | The DWN switch now
functions just
key.
alternate between the VFO
and MR | like the CHL key on the front panel.
mode. (See Section 4-7-3.}
Note:
- —
When the transceiver is delivered from the factory or
when the microprocessor is reset, the UP/DWN swit-
ches function as normal frequency UP/DWN con-
trols.
32