Table of Contents
Advertisement
ODOR NEUTRALIZER TECHNOLOGY
ADJUSTING THE ODOR INTENSITY
ODOR DIAL
Flip up the dial handle and rotate the odor dial
to adjust odor neutralizer technology intensity
or to unlock the dial for cartridge access.
Insertion/Removal: Rotate the odor dial to align the teal arrows. Remove the dial to access
the odor cartridge for removal or replacement.
Low: Rotate the dial toward the Low position to decrease the intensity to the lowest level
when the vacuum is in use.
High: Rotate the dial toward the High position for the highest intensity level when the
vacuum is in use. This position is the recommended setting for optimal performance.
ODOR NEUTRALIZER TECHNOLOGY TIPS
Odor Dial Must be Installed for Vacuum to Function Properly
• Remove odor cartridge from dial if you don't want the benefits of the odor
neutralization technology.
Maintenance Required
• Clean all filters as recommended under Cleaning Filters.
• Empty the dust cup before storing your vacuum.
• Replace the cartridge as recommended under Odor Cartridge Replacement.
• Visit qr.sharkclean.com/odortech to learn more and purchase replacements.
• If wet pet messes are cleaned up, thoroughly clean the vacuum.
Fragrance Strength Over Time
• The intensity of the odor neutralizer technology's fragrance may diminish over time. It may also
have no noticeable fragrance at all. This is natural and does not indicate the technology
isn't working. Follow replacement instructions to ensure continued performance.
NOTES: • The odor dial needs to be installed for the vacuum to function properly, with or without the odor cartridge.
• Odor Neutralizer technology effectively deodorizes while interacting with odors from inanimate sources.
s h a r kc l e a n . c o m
ODOR NEUTRALIZER TECHNOLOGY
ODOR CARTRIDGE REPLACEMENT
1. REMOVE ODOR DIAL
FROM THE AUTO-EMPTY DOCK
Flip up the handle and rotate the dial clockwise
until the two arrows are aligned. Pull the handle
to remove the dial from the auto-empty dock.
3.REMOVE NEW CARTRIDGE
FROM BAG
Remove the new odor cartridge from the
sealed packaging. To maintain the life of
the cartridge, keep it in the sealed
packaging until you are ready to install it.
5. INSTALL DIAL IN THE
AUTO-EMPTY DOCK
Align the teal arrow on the dial cover with the
arrow on the auto-empty dock, then reinsert
the dial into the auto-empty dock. Rotate the
dial counterclockwise until it clicks into an
intensity setting to engage. Rotate further to
change the intensity setting.
2. REMOVE OLD ODOR
CARTRIDGE
Rotate the cartridge counterclockwise in
the dial housing and pull out the cartridge to
remove it.
TURN UNTIL
CLICK TO LOCK
4. INSTALL NEW CARTRIDGE
IN DIAL
Align the yellow arrow on the side of the cartridge
with the yellow arrow on the side of the dial
cover, then insert the cartridge into the dial.
Rotate the cartridge clockwise to lock it in place.
6. USED CARTRIDGE
DISPOSAL
Dispose of the old cartridge by dropping it
into the trash.
NOTE: Odor cartridges should be replaced every
6 months for optimal odor neutralizer technology
performance.
s h a r kc l e a n . c o m
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Cordless Detect Pro IW1600 Series and is the answer not in the manual?
Questions and answers
The dust dispenser with not **** the dirt anymore
The dust dispenser on the Shark Cordless Detect Pro IW1600 Series may not be collecting dirt anymore due to a full dust cup, which can be indicated by the dust bin full indicator light. To resolve this, empty the dust cup by turning off the power, holding the vacuum over a trash bin, and pressing the release button to open the dust cup lid and release debris. Additionally, check if the filters are clogged and clean them as needed, ensuring they are completely dry before reinstalling.
This answer is automatically generated
@Mr. Anderson
I did all that - and it will not **** the dirt into the dust box anymore ?
The Shark Cordless Detect Pro IW1600 Series may not be picking up dirt into the dust box due to several possible reasons:
1. Full Dust Bin – If the dust bin full indicator light is on, the bin needs to be emptied.
2. Clogged Filters – Filters might be clogged and should be cleaned and air-dried completely before reinserting.
3. Blocked Nozzle or Wand – There may be debris blocking the nozzle or wand, preventing suction.
4. Improper Assembly – Ensure all components, including the dust cup and accessories, are securely attached.
5. Battery Issues – If the vacuum is not powered properly, check if the battery is charged and correctly installed.
Cleaning the filters, emptying the dust bin, and checking for blockages can help restore proper suction.
This answer is automatically generated