Advertisement
e. Press ENTER. The receiver automatically fine tunes the new satellite position. The
"Auto-Skew" and "Auto-ANT." messages flash on screen. The flashing stops when the
process is complete.
f. Repeat steps 6.b through 6.e for each satellite in turn, moving eastward, until you have
entered all the desired satellites. When the last satellite has been entered, the receiver
must be put back in Auto Mode.
g. Press FUNCTION.
h. Select No. 4, Receiver Mode.
i. Select No. 1, Auto.
j. Press ENTER. The receiver is now in Auto Mode. Any of the programmed satellites
may be called by pressing the "C-SAT" key (Ku-SAT, if a Ku satellite), followed by the
2 digit satellite name.
Main Functions List TRX 15, TRX 1500, TRX 1520
PROGRAM MODE
1. SET UP
1.1 Remote Ind.
1.2 Channel Scan
1.3 Auto Tuning
1.4 Input Mode
2. CHANGE PROGRAM
2.1 Change Polarity/Skew
2.2 TI Filter/Channel Fine
2.3 Change Antenna Limit
3. INSTALLATION
3.1 Ku-Sat Format
3.2 Calibrate Ku Channel
3.3 Rem Noise Sensor
3.4 All Data Clear
4. RECEIVER MODE
To access any of the functions, put the receiver into the desired mode (Auto or Program), then
press the FUNCTION key. If you can not access the Program Mode, you must disable the
Parental Control.
TRX 15, TRX 1500, TRX 1520
1. CUSTOMER CHOICE
1.1 Remote Ind.
1.2 Basic OSD
1.3 Antenna Move Blank
1.4 Skip Tuning
2. CHANGE PROGRAM
2.1 Change Polarity/Skew
2.2 TI Filter/Channel Fine
2.3 Channel Skip
2.4 Audio Program
2.5 Category Selection
2.6 Favorite Program
2.7 Realign Satellite Memory
3. PARENTAL CONTROL
3.1 PL Enable/Disable
3.2 Antenna Lock
3.3 Channel Lockout
3.4 Change Password
4. RECEIVER MODE
6
AUTO MODE
Advertisement
