Unexpected Behaviour - Miele KM 7404 FX Operating And Installation Instructions

Unexpected behaviour

Problem
The sensor switches
show increased
sensitivity or fail to
react.
Power level 9 is
automatically reduced if
you also set power
level 9 for the
connected cooking
zone.
A cooking zone
switches itself off
automatically.
The cooking zone is not
working in the usual
way on the power level
selected.
Possible cause and remedy
The sensitivity level of the sensor switches has
changed.
 Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the
cooktop. The area surrounding the cooktop must
not be too dark.
 Make sure that there is nothing covering the
sensors or the cooktop.
Take any pans off the cooktop and wipe away any
food deposits.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
Operating both zones at power level 9 exceeds the
permitted maximum power for the two zones.
 Use a different cooking zone.
It has been operated for too long.
 You can use the cooking zone again by switching
it back on (see "Familiarising yourself with the
appliance - Safety switch-off").
The overheating protection mechanism has been
activated.
 Allow the cooktop to cool down.
 Remove the cause of the overheating (see
"Familiarising yourself with the appliance -
Overheating protection").
 Check that the cooktop works.
 If the problem occurs again, contact Miele.
Problem solving guide
61