Disassembling The Integrated Frequency Inverter 3Fc4; 1St/Pb/Cb/Sc - Elmo Rietschle 2BH20360-3 Repair Instructions

10 Disassembly options
610.44495.40.330 · 09.2013
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
10.2

Disassembling the integrated frequency inverter 3FC4..2-

1ST/PB/CB/SC

▪ Remove the screw of the frequency inverter cover (600S) and remove along
with the toothed washer (600W).
▪ Remove the frequency inverter cover (600C).
▪ Mark the cables, if required, for assembling.
▪ Disconnect all the electrical connections to the frequency inverter (600).
▪ Remove the screws (638).
▪ Lift the frequency inverter (600) upwards.
▪ Remove the screws (637).
▪ Remove the hood (600D) and seal (600G).
▪ Mark the cables, if required, for assembling.
▪ Disconnect all electrical connections from the terminal board (650).
▪ Remove the screw (651).
▪ Remove the terminal board (650) by lifting it up.
▪ Remove the screws (642).
▪ Remove the adapter plate (648).
▪ Remove the seal (643).
54 / 67
Tel. 071 918 60 60, Mail: v-g@prematic.ch
© Gardner Denver Deutschland GmbH