Table of Contents
Advertisement
Radio Controls
Band Soiection. (BAND)
Each time you press the "BAND", the band
will be selected.
The
radio frequency
ap-
pears on the display panel of the main unit.
Rsdio Reception (TUNE <4 / TUNE PP)
Press "PP" for tuning to higher frequency.
Press "<4" for tuning to lower frequency.
Seek Tuning (TUNE <4 / TUNE PP)
Press "<4" or "PR" and hold it for half a sebbpel Seek
tuning will operate and will stop on the next station.
NOTE:
To find the next station repeat this operation
again and so on until the desired station is reached.
Cassette Controls
Radio Monitor (RM)
During tape playback, if you want to listen to the ra-
dio
momentarily,
simply
press
the
"RM".
Tape
playback will stop (pause mode) and the radio can
be
heard.
The
LCD
display
shows
the
radio
frequency. To resume tape playback, press the "RM"
again.
Rewind/Fast Forwsrd ( <44/ >>)
Press "PP" for fast forward.
Press "<4" for rewind.
To stop rewind or fast forward operation, prese "M".
Then the tape play will resume from that position.
NOTE: Make sure the "TPS" is not on. Otherwise,
the TPS function will operate.
To Stop Rewind or Fast Forward Operation (M)
Press "M" to stop fast forward or rewind operation.
Tspe Program Selector (PRG)
During tape playback, if you want to change the di-
rection of tape play, press "PRG". Otherwise, tape
direction will change automatically at the end of the
tape (AUTO REVERSE system).
Advertisement
Table of Contents
