Location And Function Of Parts And Controls - Sony TU-1041U Operating Instructions Manual

Location and Function of Parts and Controls
[11121 1814151611718 Es 11
[1] Program indicator
Indicates the selected channel number.
Remote Control sensor
[3] AFT indicator
Usually this indicator lights. When you do fine tuning
manually it goes off.
l4] MTS/STEREO indicator
'The indicator lights in four modes as follows:
Green: The tuner is receiving main sound when the
broadcast is not in stereo, and is ready to
recelve stereo sound,
Amber : The tuner is receiving stereo (main} sound.
Off: Ifthe indicator goes off, the tuner is receiving
monaural (main) sound.
Red: The tuner is receiving the Second Audio
Pragrams (SAP) broadcast.
When the indicator is green or amber, the reception
mode autumutically switches according to the broadcast.
[5] CATV indicator
When CATY is selected, the indicator lights up.
(6| POWER indicator
When the tuner is turned on, the indicator lights up. The
POWER indicator also functions as the battery mdicator.
When the internal battery becomes weak, the mdicator
flashes.
MEMORY button
Use this button to add or erase a channel in the channel
scan memory.
12, {13
[8] FINE button
Press this button for a few seconds ta adjust the tine
tuning.
[9] CATV button
Use this button to select the CATY,
MTS button
Press this button to switch the reception modes of the
tuner. Each time you press this button, the reception
mode switches in order of main, monaural, SAP, and
back to main.
When the tuner is in the stereo mode, press this button
ta switch between stereo and monaural.
Main mode refers to munaural main sound when the
broadcasl is not in stereo, or stereo sound when the
broadcast is in stereo.
[11] 0-9 buttons
Use these buttons to select a channel.
12 ENTER button
Press this button to tune in the selected channel.
Ty select channel 14, for example, press 1—4—ENTER.
CHANNEL +/-,
MEMORY ADD/ERASE buttons
Use these buttons to scan channels, to add erase
channels in the channel scan memory, or ta adjust the
{fine tuning.
POWER switch
Depress to turn the tuner on.