Vitus Audio Signature Series Owner's Manual page 10

3. OPERATION
The elements in the menu
You can modify the settings of your SM-103 Mk.II by entering the menu and selecting
the options you require. Refer to the menu structure diagram on page 19 for specific
information.
The sub-menus are highlighted in different colours.
AutoStb, RESET, LOGO, BRIGHT and
DATA,
See chapter 7 for options on modifying settings.
MODE
Select if the SM-103 Mk.II should operate in Classic or Rock mode.
RESET
Restore the settings of the SM-103 Mk.II to its default settings.
DATA
Shows information about this SM-103 Mk.II.
LOGO
Turn ON/OFF the VA logo on the front panel
BRIGHT
Change the brightness of the display to 0, 1, 2 or 3.
18 | SM-103 Mk.II Owner's manual
INPUTS,
INPUTS
Change settings for each input.
TEXT
Lets you change the name of a specified input.
By default the inputs are named input 1 and input 2 and a list
of predefined input names can be found in the text-menu. If the
name of your device is not on the list, you can choose to make
your own device name.
USED
Activates or disactivates specified inputs.
If you only use one of the inputs, it is possible to disable the input
that is not used.
The elements in the menu
MENU
EXIT
*
MODE ROCK / CLASSIC
SETUP BACK
BACK
DATA
AutoStb
RESET
LOGO
BRIGHT
INPUTS
* The SM-103 will count down from 20 to 0 and restart
once another mode has been chosen
3. OPERATION
o – 360 (min)
RESET NO / RESET YES
ON / OFF
0 / 1 / 2 / 3
BACK
BACK
INPUT 2 BACK
INPUT 1 BACK
TEXT
USED USED / NOT USED
SM-103 Mk.II Owner's manual | 19