Page 1
BME280 Desktop Development 2.1 User Manual BME280 User Manual Document revision Document release date April 2023 Document number BST-BME280-DSxxx-yy 0 273 141 185 Sales Part Number Notes Data and descriptions in this document are subject to change without notice. Product photos and pictures are for illustration purposes only and may differ from the real product appearance.
DD2.1 UI is a PC based software used to read, capture, and display sensor data. To display the sensor data of BME280 on DD2.1 UI, mount the sensor on the Bosch Sensortec application board. This is a universal demonstration environment for Bosch Sensortec sensor products.
6 | 23 3 Getting Started The below sections highlight the procedure to set up connections between BME280, DD2.1 UI , and the PC. 3.1 Setting Up the board-PC connection The procedure to connect sensor to PC via USB is as below: ...
(including but not limited to satellite technology). The resale and/or use of Bosch Sensortec products are at the purchaser ’s own risk and his own responsibility. The examination of fitness for the intended use is the sole responsibility of the purchaser.