Factory Reset
You can factory reset the module by pressing and holding down the
Factory Reset button until the Green LED flashes. The module will then
reset.
Getting More out of your WFD-46
Access the WFD-46 Manual at http://www.wifitrax.com/manuals/WFD-
46/WFD-46-Manual.pdf
More Information
Other resources:
http://www.wifitrax.com/appNotes/howToArticles.html
WifiTrax products are made in Australia using globally-sourced components and
services. Check our website for warranty information.
This product is not a toy. Keep away from children. It is not suitable for use by persons
under 14 years of age.
Warning: This product contains chemicals known to the state of California to cause
cancer, birth defects or other reproductive harm.
WifiTrax Model Science
www.wifitrax.com
WifiTrax
www.wifitrax.com
WFD-46 Getting Started Guide
This document is online at http://www.wifitrax.com/appNotes/quickStart/WFD-
46-Quick-Start.pdf. Please consult the full WFD-46 manual for much more detail
at http://www.wifitrax.com/manuals/WFD-46/WFD-46-Manual.pdf
Package Contents
1 x WFD-46 Module in Static Shielding Bag, this document, mounting Kit
WFD-46 5 Amp Wi-Fi/DCC Trackside
Adjustable Booster with Auto-Reverse
Blue DCC Normal LED
Yellow DCC Reversed LED
Green Net LED
Red Power LED
Bipolar DCC
Track
Output
DCC Voltage Adjust
Clockwise to Increase
Figure 1. WFD-46 Connections
WifiTrax Model Science
Factory Reset
(Press and hold until green LED flashes)
Firmware
Update
Control Bus
Input/Output
4
3
2
1
OFF
DIP Switches
ON
Control Bus
Input/Output
Power
18V-24V
Alternative
Bipolar
Power
Track DCC
18V-24V
Input
www.wifitrax.com