Activating The Always On Display Feature; Activating Watch Only Mode - Samsung Galaxy Watch 4 Classic User Manual

Getting Started
Customise a watch face with a picture
Apply a picture as your watch face after importing a picture from your smartphone. Refer
to Importing images from your smartphone
from a smartphone.
1
Tap and hold the Watch screen and tap Add watch face.
2
Tap My Photo+.
3
Tap Customise.
4
Tap the screen and tap Add photo.
5
Select a picture to apply as a watch face and tap OK → OK.
To zoom in or out on the picture, double-tap the image quickly, or spread two fingers
apart or pinch the picture. When the picture is zoomed in, swipe the screen to make a part
of the picture appear on the screen.
• To select several pictures at the same time, tap and hold a picture, select pictures by
using the bezel or swiping left or right on the screen, and then tap
• To add extra pictures after selecting pictures, rotate or swipe the bezel clockwise.
Alternatively, swipe left on the screen and tap Add photo.
• Up to twenty pictures can be added as the watch face. The pictures you add will
appear when you tap the screen.
6
Swipe the screen to change the background and other items and return to the previous
screen.

Activating the Always On Display feature

Set the Watch screen and some apps' screens to always stay on while wearing your Watch.
However, the battery will drain more quickly than normal while using this feature.
Open the quick panel by dragging downwards from the top edge of the screen and tap
. Alternatively, on the Apps screen, tap
Display switch to activate it.

Activating watch only mode

In watch only mode, only the time will display and all other functions cannot be used.
On the Apps screen, tap
To deactivate watch only mode, press and hold the Home key for more than three seconds.
for more information about importing pictures
(Settings) → Display and tap the Always On
(Settings) → Battery → Watch only and tap Turn on.
33
.