Advertisement
OPERATION
Before first use
Remove packaging, empty the drawer,
clean the interior of the oven and the hob.
Take out and wash the oven fittings with
warm water and a little washing–up liquid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains and
wash carefully; the heating zones of the hob
should be heated for around 4 min. without
a pan.
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
Child lock function
When delivered, the appliance child lock
function is factory activated, i.e. you will not
be able to use the oven or the hob.
Note. When child lock function is acti-
vated, the indicator lights up red and when
it is deactivated, the indicator is off.
Child lock indicator
Child lock button
To deactivate the child lock, turn the oven
function knob to the
press and hold the child lock button for 5
seconds. The child lock indicator goes off.
Now you can use the appliance.
To use the hob, deactivate the child lock and
set the timer to a position other than 0. To
activate the child lock, turn the oven function
knob to the
and hold the child lock button for 5 seconds.
Note. When you disconnect the power, the
child lock function activates again
Mechanical timer
Use the timer to set the hob heating dura-
tion. The timer can be the set from 0 to 120
minutes. When the set duration has elapsed,
you will hear beeping and cooking zones will
be turned off.
To set heating duration - turn the knob clock-
wise and set the desired time.
When the knob is set to "0", the cooking zone
cannot be used.
Note. First turn timer knob by approx. 90° and
set the desired duration from 0 to 10 minutes.
13
(key) pictogram and
(key) pictogram and press
Advertisement
