Wired Remote - IndeeLift PPU-S User Manual

Components and Controls:

Wired Remote

WARNING
or around the PPU-S to avoid mishaps that could result in death or serious injury.
The wired remote control is connected to the PPU-S with a coiled cord and is
used to raise and lower the seat by pressing the up or down button. Raising or
lowering the seat takes approximately 75 seconds. The wired remote has
graphics indicating the up and down functionality. The wired remote is generally
stored on the PPU-S's handles with the hanger clip. If intended for self-
operation, the wired remote should be stored on one of the rise-assist handles
with the seat lowered to the ground.
NOTICE
wired remote to place it on one of the lower rise-assist handles (Fig 1). If the unit is intended for assisted
operation, place the wired remote on one of the upper transport handles (Fig 2).
Page 6 of 20
PPU-S User's Manual
Power cords could cause strangulation. Keep young children from playing with
If the unit is intended for self-operation, use the hanger clip on the back of the
Fig 1
Copyright 2023 IndeeLift, Inc. All Rights Reserved
Fig 2
08/2023