Replacing The Tobii Eye-Tracker Module; Procedure; Post-Requisites - Alienware 17 R4 Service Manual

All manuals and user guides at all-guides.com
Replacing the tobii eye-tracker
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

NOTE: After replacing the Tobii eye-tracker module, launch the EyeX
application with internet connection to update the firmware
automatically.
Using the alignment posts, place the tobii eye-tracker module on the display bezel
and snap it into place.

Post-requisites

1 Follow the procedure from step 2 to step 4 in
2 Replace the display
3 Follow the procedure from step 2 to step 15 in
4 Replace the computer
5 Replace the rear-I/O
6 Replace the memory
7 Replace the solid-state
8 Replace the wireless
9 Follow the procedure from step 4 to step 7 in
10 Replace the base
computer. After working inside your
assembly.
base.
cover.
modules.
drive.
card.
cover.
After working inside your
"Replacing the display
"Replacing the system
"Replacing the hard
computer.
bezel".
board".
drive".
99