FIEDLER H531 User Manual page 46

H531 level gauge assembly
Type: H531___ v. no.: ___________ Date of sale: ______________
Sensor: _______ v. no.: ___________
The product was tested and set up correctly before being shipped from the company. Nevertheless, it may
happen that during operation, defects may appear on the device that are undetectable when the product is
tested by the manufacturer.
If any defect is caused by faulty material, workmanship or software, the product will be repaired or re-
placed free of charge if the claim is made within the warranty period, which is :
If the manufacturer is unable to repair or replace the product within the warranty period, it may provide
a refund of the purchase price upon return.
The manufacturer is not liable for defects caused by interference with the design of the device, damage to
the device or improper connection. When installing and operating the device, it is necessary to observe all
the instructions in the Technical Specifications, the related ČSN and safety rules.
All repairs during the warranty period are the sole responsibility of the manufacturer. For hygiene reasons,
only clean and properly packaged products should be sent for repair.
within the meaning of Act No.22/1997 Coll., on technical requirements for products
Manufacturer :
FIEDLER AMS s.r.o.
Lipová 1789/9, 370 05 České Budějovice, Czech Republic
ID:03155501
Pursuant to§ 13 paragraph (5) of Act No.22/1997 Coll., on Technical Requirements for
Products, we assure the distributor/customer that we have issued a "Declaration of Con-
formity" for the products manufactured/imported by us, which are covered by the afore-
mentioned Act and the relevant government regulations
In Ceske Budejovice on 11. 06. 2021
46
Warranty Card
two years from the date of sale.
Assurance of conformity
..............................................................
Manufacturer / Supplier
Ing. Jindřich Fiedler
electronics for ecology
Managing Director
User manual
FIEDLER