Page 1
USER MANUAL ROBOTIC POOL FLOOR CLEANER WY350 READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE Thank you for purchasing WYBOT Robotic Pool Cleaner. If you have any question or issue, please contact us for customer service.
Page 2
Important tips: 1. When the cleaner is placed on shore or is taken out from the pool, please make sure to turn off the power supply, otherwise it will easily cause serious damage to the cleaner. 2. The power cord of the cleaner must be plugged into the socket with leakage protection device.
Page 3
8. Non-professionals shall not disassemble the main machine body of the cleaner and the power supply control box at will, to avoid danger or avoid damage to the cleaner. 9. To prevent accidents, it is recommended that the power supply box should be connected to the fixtures beside the pool with safety ropes before use.
Page 4
Matters needing attention: 1. When putting the cleaner into the swimming pool, the bottom of the cleaner shall face the pool wall, hold the handle and put the cleaner into the water. And the cleaner will slowly discharge the gas (the gas in the cleaner must be completely discharged, otherwise it will affect the normal operation of the machine).
Contents I. Brief introduction to product .................6 II. Safety: ........................6 III. Specifications and parameters ................7 IV. Instructions for use ....................8 V. Acquisition of mobile App and connection ............9 VI. Packing details ....................10...
I. Brief introduction to product WY350-Power I is a high-end series product, which integrates the most advanced technology of swimming pool cleaning robot, including sensor integration, intelligent path planning, self-adaption to swimming pool, super obstacle-surmounting capacity, high-efficiency dirt suction and high-precision filtration, remote control and upgrade functions.
III. Specifications and parameters 1. Input rated voltage: 100~240VAC Frequency: 50Hz/60Hz Output voltage: DC28V 2. Power of the power supply: 130W; power of the machine: 100W 3. Working time: 1h/2h/3h 4. Working mode: four modes: whole pool/pool bottom/pool wall/waterline. 5. Flow: about 15m³/ h. 5.
IV. Instructions for use 1. Power button: press it long (3S): start-up/shutdown. Press it short: (after startup) standby/automatic operation. Status of its backlight indicator light: standby-always on. Automatic operation-breathing Fault status-flashing 2. Bluetooth button: it is used with APP, press the button and hold for 3S, and connect with the Bluetooth according to the user name and password sent by APP.
Cover opening button V. Acquisition of mobile App and connection 1. Download the App: 1) In case of Android phones, search google play for winnygo, and download it 2) In case of iPhone, searches the app store for winnygo, download it 2.
3. To obtain weather information in APP, you need to turn on Location service. VI. Packing details Specificatio Quantity Name Purpose Remarks (pieces) Main machine body Put it directly in the WY350 of the cleaner packing box Power supply box Power I 130 User Manual Quick guide manual Certificates of conformity...
Page 11
LIMITED WARRANTY WYBOTICS ROBOT, owned by WYBOTICS CO., LTD, makes products at the best quality we can offer. All WYBOT products have been inspected against defects in materials and workmanship prior to leaving factory. WYBOT is happy to offer warranty for the repair or replacement of pool products for two (2) years on motor and PCB from the date of purchase.
Need help?
Do you have a question about the WY350 and is the answer not in the manual?
Questions and answers