Magnescale DF800S Series Instruction Manual

Specifi cations
Model name
Measuring range
Resolution
Accuracy (at 20°C)
Measuring force (at 20°C)
Maximum response speed
Reference point
Reference point response speed
Output
Spindle drive system
Number of cycles tested
(Depends on the evaluation test defi ned by Magnescale Co., Ltd.)
Protection grade
(Not including interpolation box
and connector)
Vibration resistance
Impact resistance
Operating temperature
Storage temperature
Power supply
Power consumption
Mass
Cable length
Feeler
Accessories
* Use the CE34 that is sold separately for the output cable. (Cable length Max.20 m)
DF830SVR
185.2
154.5
8.6 45.7
138.7
66
70
79
45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan
DF830SVR
2-A01-974-1B
DF830SVR
30 mm
0.1 μm
1.7 μm
Air pressure of 0.07 Mpa: 1.9 N or less in all directions
Air pressure of 0.09 Mpa: 2.6 N or less in all directions
80 m/min
Position at spindle movement of 1±0.5 mm
80 m/min
Serial communication protocol
Air pressure ejection
60 million
IP53
When using the DZ830BV: IP67
100 m/s 2 (20 to 2000 Hz)
1000 m/s 2 (11 ms)
0 to 50°C
–20 to 60°C
DC +10 to +30 V
1.2 W or less
Approx. 80 g (Not including cable and interpolation box)
2 m
Carbide ball tip, Mounting screw M2.5
Instruction Manual, Spanner
10.2
Cable length 2 m
Unit: mm
©2015 Magnescale Co., Ltd.
Digital Gauge
DF830SVR
Instruction Manual
Read all the instructions in the manual carefully before use and
strictly follow them.
Keep the manual for future references.
Safety Precautions
Magnescale Co., Ltd. products are designed in full consideration of
safety. However, improper handling during operation or installation
is dangerous and may lead to fi re, electric shock or other accidents
resulting in serious injury or death. In addition, these actions may
also worsen machine performance.
Th erefore, be sure to observe the following safety precautions in
order to prevent these types of accidents, and to read these "Safety
Precautions" before operating, installing, maintaining, inspecting,
repairing or otherwise working on this unit.
Warning Indication Meanings
Th e following indications are used throughout this manual, and
their contents should be understood before reading the text.
Symbols requiring attention
CAUTION ELECTRICAL
Warning Failing to follow the precaution items given
• Do not damage, modify, excessively bend, pull on, place
heavy objects on or heat the cable, as this may damage the
cable and result in fi re or electric shock.
• Do not disassemble or modify the unit, as this may result
in injury or electric shock. Th ese actions may also damage
the internal circuitry.
Caution
• Th e unit does not have an explosion-proof structure.
Th erefore, do not use the unit in an atmosphere charged
with infl ammable gases as this may result in fi re.
2020.6
Printed in Japan
• Before and during operations, be sure to check that our products
• Provide adequate safety measures to prevent damages in case our
• Use outside indicated specifi cations or purposes and modifi cation
• When using our products in combination with other equipment,
Symbols prohibiting actions
DO NOT
SHOCK DISASSEMBLE
below may lead to severe injury or death.
[For U.S.A. and Canada]
THIS CLASS A DIGITAL DEVICE COMPLIES WITH PART15 OF
THE FCC RULES AND THE CANADIAN ICES-003. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
Failing to follow the precaution items given
below may lead to injury or damage to
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
surrounding objects.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
C E T A P PA R E I L N U M É R I Q U E D E L A C L A S S E A
EST CONFORME À LA NORME NMB-003 DU CANADA.
General precautions
function properly.
products should develop malfunctions.
of our products will void any warranty of the functions and
performance as specifi ed of our products.
the functions and performances as noted in this manual may
not be attained, depending on operating and environmental
conditions.
AND
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDERSIGNED OPERATION.