1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Server
  5. ThinkEdge SE360 V2
  6. System configuration manual

Lenovo ThinkEdge SE360 V2 System Configuration Manual

Hide thumbs Also See for ThinkEdge SE360 V2:
Table of Contents

Advertisement

Quick Links

Download this manual
ThinkEdge SE360 V2
System Configuration Guide
Machine Types: 7DAM

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkEdge SE360 V2

Summary of Contents for Lenovo ThinkEdge SE360 V2

  • Page 1 ThinkEdge SE360 V2 System Configuration Guide Machine Types: 7DAM...
  • Page 2 Before using this information and the product it supports, be sure to read and understand the safety information and the safety instructions, which are available at: https://pubs.lenovo.com/safety_documentation/ In addition, be sure that you are familiar with the terms and conditions of the Lenovo warranty for your server, which can be found at: http://datacentersupport.lenovo.com/warrantylookup First Edition (July 2023) ©...

  • Page 3: Table Of Contents

    Contents ....i Chapter 5. System configuration . . . 59 Set the network connection for the Lenovo XClarity Safety ....iii Controller .
  • Page 4 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 5: Safety

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright Lenovo 2023...

  • Page 6: Safety Inspection Checklist

    1 & IEC 60950-1, the standard for Safety of Electronic Equipment within the Field of Audio/Video, Information Technology and Communication Technology. Lenovo assumes you are qualified in the servicing of equipment and trained in recognizing hazards energy levels in products. Access to the equipment is by the use of a tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.
  • Page 7 Click Power ➙ Power Cables to see all line cords. • Make sure that the insulation is not frayed or worn. 3. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations.
  • Page 8 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 9: Chapter 1. Introduction

    Chapter 1. Introduction The ThinkEdge SE360 V2 server (Type 7DAM) is a new edge server offering. It is specifically designed to meet the needs of edge computing, edge AI, hybrid cloud and workloads at the edge locations. ThinkEdge SE360 V2 is a rugged compact sized edge solution with a focus on smart connectivity, business security and manageability for the harsh environment.

  • Page 10: Tech Tips

    The server provides a QR code on the system service label, which is on the cover of the server, that you can scan using a QR code reader and scanner with a mobile device to get quick access to the Lenovo Service Information website.

  • Page 11: Security Advisories

    Follow the on-screen instructions to choose the category for the problem that you are having. Security advisories Lenovo is committed to developing products and services that adhere to the highest security standards in order to protect our customers and their data. When potential vulnerabilities are reported, it is the...
  • Page 12 • M.2 storage drives – Up to eight NVMe M.2 storage drives of the following drive form factors: – 80 mm (2280) – 110 mm (22110) • Hot-swap drives – Up to two 7mm SATA/NVMe hot-swap drives ThinkEdge SE360 V2 System Configuration Guide...
  • Page 13 • Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities. – The server supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo XClarity Controller 2 (XCC2), refer to https://pubs.lenovo.com/lxcc-overview/...
  • Page 14 – The x86 WLAN module (Intel AX210) officially supports Microsoft Windows Server operating system. – Some non-Windows operating systems with corresponding inbox driver might be able to support the x86 WLAN module (Intel AX210). For a list of operating systems supporting Intel AX210, see ThinkEdge SE360 V2 Product Guide on https://lenovopress.lenovo.com/...
  • Page 15 Commission Regulation (EC) No 278/2009 (ErP Lot7) for the external power supply of the product. ThinkEdge 300W 230V/115V External Power Supply Information published Value and precision Unit Manufacturer’s name Lenovo Model identifier ADL300SDC3A Input voltage 100-240 Input AC frequency 50-60 20.0...

  • Page 16: Mechanical Specifications

    • The x86 WLAN module (Intel AX210) officially supports Microsoft Windows Server operating system. • Some non-Windows operating systems with corresponding inbox driver might be able to support the x86 WLAN module (Intel AX210). For a list of operating systems supporting Intel AX210, see ThinkEdge SE360 V2 Product Guide on https://lenovopress.lenovo.com/...

  • Page 17: Environmental Specifications

    Dimension Node • Height: 84.5 mm (3.33 inches) • Width: 212 mm (8.35 inches) • Depth: 317.5 mm (12.5 inches) Node with node sleeve • Height: 95.95 mm (3.78 inches) • Width: 295 mm (11.61 inches) • Depth: 345.7 mm (13.61 inches) Enclosure •...
  • Page 18 Lenovo recommends that you consult with qualified experts in this field to determine whether you are in compliance with the applicable regulations.
  • Page 19 Ambient temperature management • Most of the configurations of SE360 V2 support operating at temperature of 55°C or lower. Specific configuration supports operating at -20°C to 65°C. See “Environment” on page for the details of configuration supporting extended operation temperature. •...
  • Page 20 Environment ThinkEdge SE360 V2 complies with ASHRAE Class A4 specifications. System performance may be impacted when operating temperature is outside AHSARE A4 specification or fan failed condition with ambient temperature over 25°C . ThinkEdge SE360 V2 is supported in the following environment: •...
  • Page 21 If Lenovo determines that the levels of particulates or gases in your environment have caused damage to the device, Lenovo may condition provision of repair or replacement of devices or parts on implementation of appropriate remedial measures to mitigate such environmental contamination.

  • Page 22: Management Options

    Management options The XClarity portfolio and other system management options described in this section are available to help you manage the servers more conveniently and efficiently. ThinkEdge SE360 V2 System Configuration Guide...
  • Page 23 • Mobile application • Redfish API Usage and downloads https://pubs.lenovo.com/lxcc-overview/ Application that reports the XCC events to local OS system log. Interface • CLI application Lenovo XCC Logger Utility Usage and downloads • https://pubs.lenovo.com/lxcc-logger-linux/ • https://pubs.lenovo.com/lxcc-logger-windows/ Centralized interface for multi-server management.
  • Page 24 Important: Lenovo XClarity Provisioning Manager (LXPM) supported version varies by product. All versions of Lenovo XClarity Provisioning Manager are referred to as Lenovo XClarity Provisioning Manager and LXPM in this document, unless specified otherwise. To see the LXPM version supported by your server, go to https:// pubs.lenovo.com/lxpm-overview/...
  • Page 25 1. Most options can be updated through the Lenovo tools. Some options, such as GPU firmware or Omni- Path firmware require the use of supplier tools. 2. The server UEFI settings for option ROM must be set to Auto or UEFI to update firmware using Lenovo XClarity Administrator, Lenovo XClarity Essentials, or Lenovo XClarity Controller.
  • Page 26 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 27: Chapter 2. Server Components

    This section contains information about each of the components associated with the server. Front view This section contains information about the controls, LEDs, and connectors on the front of the server. The front view of ThinkEdge SE360 V2 varies by model. Refer to the following information for front view identification: •...

  • Page 28: Front View With 10/25Gbe I/O Module

    “2.5GbE RJ-45 connectors (LAN 1 and 2)” on page 21 “Front operator panel” on page 21 “10/25GbE SFP28 connectors (LAN 3 to 6)” on page 21 LAN 6 with shared-NIC feature for Lenovo XClarity Controller “USB 3.2 Gen 1 (5 Gbps) Type-A connectors (USB 1 “Bluetooth antenna or Bluetooth antenna filler”...

  • Page 29: Front Operator Panel

    USB 2.0 Type-C connector with Lenovo XClarity Controller management (USB 4) Connection to Lenovo XClarity Controller is primarily intended for users with a mobile device running the Lenovo XClarity Controller mobile application. When a mobile device is connected to this USB port, an Ethernet over USB connection is established between the mobile application running on the device and the Lenovo XClarity Controller.

  • Page 30: Xcc Wlan Antennas

    XCC WLAN antennas WLAN antennas are optional parts, available for the models with wireless module. Two antennas for XCC WLAN can be installed in ThinkEdge SE360 V2. The models without wireless module come with SMA fillers. x86 WLAN antennas WLAN antennas are optional parts, available for the models with wireless module. Two antennas for x86 WLAN can be installed in ThinkEdge SE360 V2.

  • Page 31: Rear View

    Figure 5. Front I/O fillers for 10/25GbE I/O module USB Type-A filler (x2) RJ-45 filler (x3) USB Type-C filler (x2) SFP28 filler (x4 Rear view This section contains information about the LEDs and connectors on the rear of the server. Note: Depending on the model, your server might look slightly different from the illustration.
  • Page 32 If applicable, before connecting DC power source to the server, remove the header from the corresponding power connector. 1. Loosen the two captive screws that secure the header; then, remove the header from the power connector. Figure 7. Removing the header 2. Store the header for future use. ThinkEdge SE360 V2 System Configuration Guide...

  • Page 33: Rear View With Ac Pib Module

    WLAN antennas WLAN antennas are optional parts, available for the models with wireless module. Two antennas for x86 WLAN can be installed in ThinkEdge SE360 V2. The models without wireless module come with SMA fillers. XCC WLAN antennas Two antennas for XCC WLAN can be installed in ThinkEdge SE360 V2.

  • Page 34: Rear I/O Filler

    WLAN antennas WLAN antennas are optional parts, available for the models with wireless module. Two antennas for x86 WLAN can be installed in ThinkEdge SE360 V2. The models without wireless module come with SMA fillers. XCC WLAN antennas Two antennas for XCC WLAN can be installed in ThinkEdge SE360 V2.

  • Page 35: Bottom View

    Figure 11. Top view Note: Depending on the model, your server might look slightly different from the illustration. Table 7. Components visible from the top view Fan 1 Processor Fan 2 Processor air baffle Rear operator panel Air flow sensor board (on the bottom side of processor air baffle) (Optional) Power input board (PIB) module Top intrusion switch...

  • Page 36: System-Board Layout

    For more information about the LEDs that are available on the system board, see “System-board LEDs” on page System-board connectors The following illustration shows the internal connectors on the system board. ThinkEdge SE360 V2 System Configuration Guide...

  • Page 37: System-Board Switches

    Figure 13. System-board connectors Table 9. System-board connectors Air flow switch connector Power module board (PMB) connector Intrusion switch connector GND busbar for PMB Fan 1 connector P12V busbar for PMB Air flow sensor board connector MicroSD socket Fan 2 connector Riser slot PCIe Gen 3 / SATA connector TCM connector...
  • Page 38 Normal (default) serial port Machine Engine (ME) ME boots to recovery Normal (default) recovery override PCH PFR bypass Enables PCH Flash to bypass Normal (default) XCC PFR bypass Enables XCC Flash to bypass Normal (default) ThinkEdge SE360 V2 System Configuration Guide...

  • Page 39: Slot And Drive Bay Numbering

    Table 10. System-board switches (continued) Usage description Switches Switch Switch name block number Enables ME update mode Machine Engine (ME) Normal (default) firmware security override XCC force update Enables XCC force update Normal (default) FPGA power Ignores Power Permission and Normal (default) permission override allows system to power-on...
  • Page 40 Slot 4 / M.2 Bay 3 Slot 6 / M.2 Bay 5 Bay 0, 1 • 7mm drive Bay 0 and 1 – The upper bay: Bay 0 – The lower bay: Bay 1 ThinkEdge SE360 V2 System Configuration Guide...
  • Page 41 Slot 7 to 10 / M.2 Bay 6 to 9 on M.2 adapter Top side of M.2 adapter Slot 9 / M.2 Bay 8 Slot 7 / M.2 Bay 6 Bottom side of M.2 adapter Slot 10 / M.2 Bay 9 Slot 8 / M.2 Bay 7 Slot 11, 12 / M.2 Bay 10, 11 on bottom M.2 cabled adapter Slots on bottom M.2 cabled adapter...

  • Page 42: System Leds

    See the following section for information on available system LEDs. Drive LEDs This topic provides information on drive LEDs. The following table describes the problems that are indicated by drive activity LED and drive status LED. ThinkEdge SE360 V2 System Configuration Guide...

  • Page 43: Front Operator Panel Leds

    Figure 15. Drive LEDs Description Drive activity Each hot-swap drive comes with an activity LED. When this LED is flashing, it indicates that the LED (green) drive is in use. Drive status The drive status LED indicates the following status: LED (yellow) •...
  • Page 44 ID button, the state of the system ID LED changes. The LED can be changed to on, blinking, or off. You can also use the Lenovo XClarity Controller or a remote management program to change the state of the system ID LED to assist in visually locating the server among other servers.

  • Page 45: Pmb Status Led

    Press this button to force a nonmaskable interrupt to the processor. You might have to use a pen or the end of a straightened paper clip to press the button. You can also use it to force a blue-screen memory dump. Use this button only when you are directed to do so by Lenovo Support. PMB status LED This topic provides information about the PMB status LED and corresponding action suggestions.

  • Page 46: Rear Operator Panel Leds

    “Power status LED (green)” on page 40 “Bluetooth button with LED (blue)” on page 39 1 11 x86 WLAN activity LED (green) The WLAN activity LED helps you identify the status of WLAN connection. ThinkEdge SE360 V2 System Configuration Guide...
  • Page 47 Status Color Description Green The x86 WLAN is operating properly. None The x86 WLAN RF is turned off, or the x86 WLAN is not operating properly, or the server does not come with wireless module. 2 10 XCC WLAN activity LED (green) The WLAN activity LED helps you identify the status of WLAN connection.

  • Page 48: System-Board Leds

    ID button, the state of the system ID LED changes. The LED can be changed to on, blinking, or off. You can also use the Lenovo XClarity Controller or a remote management program to change the state of the system ID LED to assist in visually locating the server among other servers.
  • Page 49 Figure 19. System-board LEDs Table 13. System board LEDs description and actions Description and actions Fan 1 error LED LED on: an error has occurred to the fan the LED represents. Fan 2 error LED DIMM 3 error LED LED on: an error has occurred to the DIMM the LED represents. DIMM 4 error LED FPGA power status LED (green) The FPGA power LED helps to identify different FPGA errors.

  • Page 50: Xcc System Management Port And Lan Port

    XCC system management port and LAN port LEDs This topic provides information on LEDs of XCC system management port and LAN ports. The LAN ports of ThinkEdge SE360 V2 varies by model. Refer to the following information to identify XCC system management port and LAN port LEDs: •...
  • Page 51 “XCC system management port LEDs” on page 43 “1GbE RJ-45 LAN port link and activity LED” on page (LAN 3 to 6) “2.5GbE RJ-45 LAN port link and activity LED” on page (LAN 1 and 2) XCC system management port LEDs Description XCC system Use this green LED to distinguish the network activity status:...
  • Page 52 • Off: One of the following status: LED (green) – The network link is disconnected. – The network link is connected with LAN speed of 100Mbps. • On: The network link is connected with LAN speed of 2.5G/1Gbps. ThinkEdge SE360 V2 System Configuration Guide...
  • Page 53 25GbE/10GbE SFP28 LAN port link and activity LED Color Description Network Green Blinking: The network is connected and active. activity LED Network link The color of the LED • Off: The network link is disconnected. indicates the LAN speed. • On: The network link is connected. •...
  • Page 54 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 55: Chapter 3. Parts List

    Tier 1 CRU at your request with no service agreement, you will be charged for the installation. • T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
  • Page 56 2. Click Parts. 3. Enter the serial number to view a listing of parts for your server. Front shipping bracket Networking dust filter Rack dust filter 2U2N enclosure Rear shipping bracket Enclosure bracket Node dummy filler ThinkEdge SE360 V2 System Configuration Guide...
  • Page 57 Type For more information about ordering parts: 1. Go to and navigate to the support page for your server. http://datacentersupport.lenovo.com 2. Click Parts. 3. Enter the serial number to view a listing of parts for your server. PCIe adapter PCIe low-profile filler...
  • Page 58 Front operator panel Wireless adapter Chassis x86 WLAN module XCC WLAN and Bluetooth module Bluetooth antenna with cable Bluetooth antenna filler 1GbE I/O module board M.2 drive M.2 drive heat sink 10/25GbE I/O module board ThinkEdge SE360 V2 System Configuration Guide...

  • Page 59: Power Cords

    Several power cords are available, depending on the country and region where the server is installed. To view the power cords that are available for the server: 1. Go to: http://dcsc.lenovo.com/#/ 2. Click Preconfigured Model or Configure to order. 3. Enter the machine type and model for your server to display the configurator page.
  • Page 60 The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. • Power cords for a specific country or region are usually available only in that country or region. ThinkEdge SE360 V2 System Configuration Guide...

  • Page 61: Chapter 4. Unboxing And Setup

    They might be required to receive warranty service. Identify the server and access the Lenovo XClarity Controller This section contains instruction on how to identify your server and where to find the Lenovo XClarity Controller access information.
  • Page 62 Lenovo XClarity Controller network access label In addition, the Lenovo XClarity Controller network access label is attached to the pull-out information tab located near the lower right corner in the front of the chassis, with MAC address and secure activation code accessible with a pull.
  • Page 63 Figure 24. Lenovo XClarity Controller network access label on the pull-out information tab Service Label and QR code In addition, the system Service Label is located on the inside surface of the top cover, provides a quick response (QR) code for mobile access to service information. You can scan the QR code with a mobile device using a QR code reader application and get quick access to the Service Information web page.

  • Page 64: Server Setup Checklist

    4. If necessary, mount the server or install the server to an enclosure. See “Configuration guide” in User Guide or Hardware Maintenance Guide. 5. Connect all external cables to the server. See Chapter 2 “Server components” on page 19 connectors locations. ThinkEdge SE360 V2 System Configuration Guide...
  • Page 65 • You can press the power button. • The server can restart automatically after a power interruption. • The server can respond to remote power-on requests sent to the Lenovo XClarity Controller. Note: You can access the management processor interface to configure the system without powering on the server.
  • Page 66 7. Configure ThinkEdge security features. See “Activate/unlock the system and configure ThinkEdge security features” on page ThinkEdge SE360 V2 System Configuration Guide...

  • Page 67: Chapter 5. System Configuration

    The following methods are available to set the network connection for the Lenovo XClarity Controller if you are not using DHCP: • If a monitor is attached to the server, you can use Lenovo XClarity Provisioning Manager to set the network connection.

  • Page 68: Update The Firmware

    ID button. To connect using the Lenovo XClarity Administrator Mobile app: 1. Connect the USB cable of your mobile device to the Lenovo XClarity Controller USB connector on the server. 2. On your mobile device, enable USB tethering.
  • Page 69 Windows Server, Red Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES) operating system distributions. Machine-type-specific firmware-only Static Bundles (Service Packs) are also available. Firmware updating tools See the following table to determine the best Lenovo tool to use for installing and setting up the firmware: Tool Update Core...
  • Page 70 4. Bare Metal Update (BMU) only. • Lenovo XClarity Provisioning Manager From Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, the UEFI firmware, and the Lenovo XClarity Provisioning Manager software. Note: By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed when you start the server and press the key specified in the on-screen instructions.
  • Page 71 • Lenovo XClarity Controller If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific server. Notes: – To perform an in-band update through Windows or Linux, the operating system driver must be installed and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

  • Page 72: Module (Intel Ax210)

    • Lenovo XClarity Integrator offerings Lenovo XClarity Integrator offerings can integrate management features of Lenovo XClarity Administrator and your server with software used in a certain deployment infrastructure, such as VMware vCenter, Microsoft Admin Center, or Microsoft System Center.
  • Page 73 Step 3. Go to Driver tag and check the driver version which is displayed. Update the driver Complete the following procedure to update the driver for the x86 WLAN module (Intel AX210) on the server. Step 1. Use one of the following method to run Windows Powershell as administrator: •...

  • Page 74: Activate/Unlock The System And Configure Thinkedge Security Features

    Restart the server. Activate/unlock the system and configure ThinkEdge security features ThinkEdge SE360 V2 supports ThinkEdge unique security features. With the security features enabled, the system will enter System Lockdown Mode when tamper events occur, and encrypted data can not be...

  • Page 75: Activate Or Unlock The System

    The status of ThinkEdge unique security features can be changed in Lenovo XClarity Controller. Important: If Lenovo XClarity Controller web interface of the server is different from the information in this section, update the firmware for the server.
  • Page 76 Have a Lenovo ID with proper permission Before activating a system for the first time, make sure to have a Lenovo ID with proper permission to log in to the ThinkShield Key Vault Portal web interface or ThinkShield mobile app.
  • Page 77 Activated” screen. 8. After the system is activated successfully, disable the Bluetooth buttons. a. Go to Lenovo XClarity Controller web interface, and click BMC Configuration ➙ Security. b. Click Bluetooth Button on Panel to disable the Bluetooth buttons. • Portal automatic activation Note: To activate the system through ThinkShield Key Vault Portal web interface for the first time, the system should be claimed by your organization.

  • Page 78: System Lockdown Mode

    • Administrator • Administrator+ 1. Log in to Lenovo XClarity Controller web interface, and go to BMC Configuration ➙ Security ➙ System Lockdown Mode. 2. Press Active button, and then press Apply button. When the status of System Lockdown Mode switches to Inactive, the system is unlocked.

  • Page 79: Manage The Self Encryption Drive Authentication Key (Sed Ak)

    Manage the Self Encryption Drive Authentication Key (SED AK) For ThinkEdge SE360 V2 with SED installed, the SED AK can be managed in Lenovo XClarity Controller. After setting up the server or making changes to the configuration, backing up the SED AK is a must operation to prevent data loss in the hardware failure case.

  • Page 80: Xcc Wlan Configuration

    SE360 V2 with wireless module supports XCC WLAN. XCC WLAN works in STA mode and the features can be configured in Lenovo XClarity Controller. Log in to Lenovo XClarity Controller web interface, and go to BMC Configuration ➙ Network ➙ WLAN to configure XCC WLAN.

  • Page 81: Disconnect From Wlan

    Note: Make sure to select the correct security type that is supported by the WLAN. 3. Enter User and Password for the WLAN if applicable. Note: When XCC is already connected to WLAN, to change the connection to another WLAN, make sure to select and input the accurate information.

  • Page 82: Manage Auto-Connect

    Log in to Lenovo XClarity Controller web interface, and go to Utilization ➙ Fan Speed (RPM) ➙ Dust Filter Measurement to take the measurement by selecting Run immediately (once), or by setting a regular schedule.
  • Page 83 Figure 27. Dust filter measurement settings After taking the measurement, see Lenovo XClarity Controller Event Log for the status of rear dust filter. For proper operation, replace the rear dust filter according to the action suggestions in the generated event.

  • Page 84: Configure The Firmware

    Several options are available to install and set up the firmware for the server. Important: Lenovo does not recommend setting option ROMs to Legacy, but you can conduct this setting if necessary. Note that this setting prevents UEFI drivers for the slot devices from loading, which may cause negative side effects to Lenovo software, such as LXCA, OneCLI, and XCC.

  • Page 85: Memory Module Configuration

    Specific details about updating firmware using Lenovo XClarity Administrator are available at: http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/server_configuring.html • Lenovo XClarity Controller You can configure the management processor for the server through the Lenovo XClarity Controller Web interface, the command-line interface, or Redfish API. For information about configuring the server using Lenovo XClarity Controller, see: “Configuring the Server”...

  • Page 86: Raid Configuration

    OS logical drives or volumes. An introduction to RAID is available at the following Lenovo Press website: https://lenovopress.lenovo.com/lp0578-lenovo-raid-introduction Detailed information about RAID management tools and resources is available at the following Lenovo Press website: https://lenovopress.lenovo.com/lp0579-lenovo-raid-management-tools-and-resources Intel VROC...

  • Page 87: Back Up The Server Configuration

    – Lenovo XClarity Administrator http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/compute_node_image_deployment.html – Lenovo XClarity Essentials OneCLI https://pubs.lenovo.com/lxce-onecli/onecli_r_uxspi_proxy_tool – Lenovo XClarity Integrator deployment pack for SCCM (for Windows operating system only) https://pubs.lenovo.com/lxci-deploypack-sccm/dpsccm_c_endtoend_deploy_scenario • Single-server Available tools: – Lenovo XClarity Provisioning Manager “OS Installation” section in the LXPM documentation compatible with your server at https:// pubs.lenovo.com/lxpm-overview/...
  • Page 88 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 89: Appendix A. Getting Help And Technical Assistance

    Appendix A. Getting help and technical assistance If you need help, service, or technical assistance or just want more information about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. On the World Wide Web, up-to-date information about Lenovo systems, optional devices, services, and support are available at: http://datacentersupport.lenovo.com...

  • Page 90: Collecting Service Data

    Collecting service data To clearly identify the root cause of a server issue or at the request of Lenovo Support, you might need collect service data that can be used for further analysis. Service data includes information such as event logs and hardware inventory.

  • Page 91: Contacting Support

    Support when certain serviceable events occur in Lenovo XClarity Administrator and the managed endpoints. You can choose to send diagnostic files to Lenovo Support using Call Home or to another service provider using SFTP. You can also manually collect diagnostic files, open a problem record, and send diagnostic files to the Lenovo Support.
  • Page 92 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 93: Appendix B. Documents And Supports

    – Rail installation in a rack • Activation Guide – Activation process and activation code • Regulatory Notice for ThinkEdge SE360 V2 with WLAN Module – Regulation of product in different countries • User Guide – Complete overview, system configuration, hardware components replacing, and troubleshooting.
  • Page 94 • Operating System Installation Instructions – https://pubs.lenovo.com/#os-installation • Submit an eTicket (service request) – https://support.lenovo.com/servicerequest • Subscribe to Lenovo Data Center Group product notifications (Stay up to date on firmware updates) – https://datacentersupport.lenovo.com/solutions/ht509500 ThinkEdge SE360 V2 System Configuration Guide...

  • Page 95: Appendix C. Notices

    Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 96: Trademarks

    (TBW). A device that has exceeded this limit might fail to respond to system-generated commands or might be incapable of being written to. Lenovo is not responsible for replacement of a device that has exceeded its maximum guaranteed number of program/erase cycles, as documented in the Official Published Specifications for the device.

  • Page 97: Taiwan Region Bsmi Rohs Declaration

    Taiwan Region BSMI RoHS declaration Taiwan Region import and export contact information Contacts are available for Taiwan Region import and export information. Appendix C. Notices...
  • Page 98 ThinkEdge SE360 V2 System Configuration Guide...

This manual is also suitable for:

7dam

Table of Contents