Connector Diagram; High Voltage Warning - Mazda KMV6V7210 Installation Instructions Manual

Digital rearview mirror
Table of Contents

Advertisement

Branch connection procedure using electro tap

4. CONNECTOR DIAGRAM

5. VEHICLE PART REMOVAL

HIGH VOLTAGE WARNING

!
On high voltage equipped vehicles, it is mandatory to disconnect the 12v battery system
On high voltage equipped vehicles, it is mandatory to disconnect the 12v battery system
and wait at least 10 seconds before continuing with any work in proximity to High Voltage
and wait at least 10 seconds before continuing with any work in proximity to High Voltage
(Orange cables and components). Direct contact with or disconnection of High Voltage
(Orange cables and components). Direct contact with or disconnection of High Voltage
(Orange cables and components) is still prohibited in this state. If the necessary measures
(Orange cables and components) is still prohibited in this state. If the necessary measures
are not taken before servicing an electric vehicle, it could cause electrical shock and result
are not taken before servicing an electric vehicle, it could cause electrical shock and result
in serious injury or, in the worst case, death. Before servicing the electric vehicle, refer to
in serious injury or, in the worst case, death. Before servicing the electric vehicle, refer to
[HIGH VOLTAGE SERVICE CAUTIONS] in the general information section of the vehicle
[HIGH VOLTAGE SERVICE CAUTIONS] in the general information section of the vehicle
workshop manual and implement the necessary measures.
workshop manual and implement the necessary measures.
Page: 5 of 35
E
D
(B)
(B)
Roof Indicator Assembly Connector
Accy Harness
Vehicle Wiring Harness Wire
Wire Color
Red (R)
Black (B)
1. Insert the vehicle wiring harness into the electro tap.
2. Fold the electro tap as shown in the figure and lock
it.
Caution
!
Firmly engage the lock part until a click sound is heard.
3. Insert the harness to the end of the electro tap.
4. Firmly press the electro tap terminal using pliers.
5. Fold the electro tap in the direction of the arrow
shown in the figure and lock it.
Harness/wire side
C
B
Harness
Green (G)
Black (B)
A
(G)
(R)
Signal
Ignition (IG)
Ground (GND)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kms6v7210

Table of Contents