Table of Contents
Advertisement
Pre-treatment Solution Safety Precautions
Preparing the Pre-treatment Solution
Agitating the Polyester Pre-treatment Solution
Filtering the Cotton Pre-treatment Solution
Diluting the Pre-treatment Solution
Pre-treating a T-shirt with a Roller
Pre-treating a T-shirt with a Pre-treatment Machine
Fixing the Pre-treatment Solution (Heat Press)
Parent topic:
Pre-treatment Solution Safety Precautions
Observe these precautions when applying the pre-treatment solution:
• Make sure you are in a well-ventilated area when applying pre-treatment solution.
• Only prepare as much solution as necessary for the current job. If you prepare more than required, the
extra solution may harden.
• Always wear protective eyewear, gloves, and a mask when applying the pre-treatment solution. If pre-
treatment solution comes in contact with your skin or enters your eyes or mouth, take the following
actions:
• If you get pre-treatment solution on your skin, immediately wash it off using plenty of soap and
water. Consult a physician if your skin is irritated or discolored.
• If pre-treatment solution gets in your eyes, rinse immediately with water. Failure to observe this
precaution could result in bloodshot eyes or mild inflammation. If problems persist, consult a
physician.
• If pre-treatment solution gets in your mouth, consult a physician immediately. If swallowed, do not
induce vomiting and consult a physician immediately. If vomiting is induced, solution may get caught
in the trachea which can be dangerous.
• Store the pre-treatment solution out of the reach of children.
• After working with the pre-treatment solution, wash your hands thoroughly and gargle.
• Store the pre-treatment solution at room temperature and away from direct sunlight.
• Do not store the pre-treatment solution in high or freezing temperatures.
• If pre-treatment solution gets stuck to the print head, it could cause the printer to malfunction and print
quality to decline. Make sure that solution does not stick to the inside of the printer by accident when
performing maintenance.
Basic Printing
31
Advertisement
Table of Contents
