Cleaning And Maintenance - Remington HC5856AU Use & Care Manual

STEP 4 - TOP OF THE HEAD
1.
Using the 25mm guide comb, cut the hair on top of the head against
the direction in which the hair normally grows.
2.
For longer hair on top, use scissors. Lift the hair on top of the head
with your fingers. Cut the hair between your fingers to the desired
length.
3.
Always work from the back of the head.
STEP 5 - THE FINISHING TOUCHES
1.
Use the hair clipper without an attachment comb for close trimming
around the base and sides of the neck.
2.
To produce a clean straight line at the sideburns, reverse the clipper.
Place the reversed hair clipper at right angles to the head, tips of the
blades lightly touching the skin and then work downwards.

CLEANING AND MAINTENANCE

DO NOT SUBMERGE THE HAIR CLIPPER IN WATER.
• Your clipper is fitted with high quality blades.
• To ensure long lasting performance of your clipper, clean the blades
and unit regularly.
AFTER EACH USE
• Ensure the appliance is switched off and unplugged from the charging
adapter before cleaning.
• Brush the accumulated hair from the blades and body of the clipper.
Do not submerge the clipper in water.
• To clean unit, wipe with a damp cloth and dry immediately.
• Place a few drops of cutter or sewing machine oil onto the blades.
Wipe off excess oil.
WASHABLE BLADE CLEANING
• The blades are washable under a running tap but must be removed
before they are cleaned in this way. Keep the body of the device dry at
all times.
• To remove the blades ensure the unit is switched off. Push the blade
set away from the clipper body using your thumb.
• To reattach once the blades are cleaned and dry, align the bottom of
the blade with the bottom blade housing tab and slide the cartridge
back into place until you hear a click.
7