Advertisement
_WARNING:
Read and understand all instructions.
Failure to follow all instrustlons listed below,can
result in electric shook, fire and/or sedous personal
injury.
SAVETHESEINSTRUCTIONS
WORK AREA
•
Keep your work area clean and well lit. Cluttered
benches and dark areas Invite accidents,
ELECTRICAL
SAFETY
Do not abuse the cord. Never use the cord to carry
the charger. Keep cord away from heat, off, sharp
edges, or moving pads. Replace damaged cords
immediately. Damaged cords may create a fire.
A battery operated tool with Integral batteries or a
separate batteP/pack must he recharged only with
the specified charger for the battery. A charger that
may be suitable for one type of battery may cre_e a
risk of fire when used with another battery. Use battery
only with charger listed.
•
Use battery operated tool only with specifically
designated battery pack, Use of any other batteries
may create a risk of fire. Use only with battery pack
listed.
PERSONAL SAFETY
•
Stay aled, watch what you am doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of Inatten-
tionwhile operating powertools may result in serious
personal Injury.
•
Do not overreach. Keep proper footing and bal-
ance at all times. Proper footing and balance enable
better controlof the tool in unexpected situations.Do
not use on a ladder or unstable support.
TOOLUSEANDCARE
Disconnect battery pack from tool before making
any adjustments, changing accessories, or storing
the tool. Such preventive safety measures reduce risk
of starting the toolacoldentaity.
Store Idle tools out of reach of children and other
untrained persons. Tools are dangerous in the hands
of untrained users.
Check for mlsallgnment
or binding of moving
pads, breakage of parts, and any other condition
that may affect the tool's operation, ff damaged,
have the tool serviced before using. Many accidents
are caused by poorlymaintained tools.
•
Use only ecceseodes that are recommended by
the manufacturer for your model. Accessoriesthat
may be suitablefor one tool, may create a riskof injury
when used on another tool.
SERVICE
•
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualifiedpersonnel could resultin a risk of Injury.
•
When servicing a tool, use only Identical replace-
ment pads. Follow Instrectlons In the Maintenance
sentlon of this manual. Use of unauthorizedparts or
failure to follow Maintenance Instrustlonsmay createa
riskof shookor Injury.
Advertisement
