DNP DP-DS620 Series Instruction Manual page 24

＜Multiple layout＞
When 5x7, 6x8 or 6x9 media is used, you can use a two-picture layout. You can enable multiple
layout settings by setting the paper size of the printer driver. If it sends multiple images from the
application, the printer driver allocate them automatically as the multiple layout.
The following section shows the image sizes.
Layout settings
Driver paper size setting
(5x3.5)
PR (3.5x5)
(6x4)
PR (4x6)
(6x4.5)
PR (4.5x6)
Multiple layout is carried out under the following conditions.
1. Set 5x7, 6x8 or 6x9 size media in the printer.
2. Set the paper size of the printer driver to one of the abovementioned paper sizes.
3. From the application, send multiple images.
Note) Depending used conditions, the rewinding print might be carried out instead of the multiple
layout. Because they are carried out by the print job, multiple layout are carried out when
there are multiple images in a single job.
If you want to layout the same image, send the same number of images as the
number-of-sheets setting.
The printer handles two pictures at one time and cuts the paper after it is ejected.
[DP-DS620 Series Printer Driver] Instruction Manual (For Windows 7, 8 and 10)
Paper Paper size length x height
direction (mm)
Portrait (131.1x92.1)
Landscape (92.1x131.1)
Portrait (92.1x131.1)
Landscape (131.1x92.1)
Portrait (156.1x105.0)
Landscape (105.0x156.1)
Portrait (105.0x156.1)
Landscape (156.1x105.0)
Portrait (156.1x117.3)
Landscape (117.3x156.1)
Portrait (117.3x156.1)
Landscape (156.1x117.3)
21
Media used
5x7, 6x8, 6x9
6x8, 6x9
6x9
Cut when paper is ejected