DENAFRIPS ARCE Owner's Manual page 9

Parameter Settings:
I²S Pin-Out Configuration:
1. Press SETUP button once, SETUP LED on. Arce Streamer in Setting Mode
2. In Setting Mode, the push buttons and LEDs on the front panel represent a different
meaning.
Button
I2S/USB
SOURCE
3. Press I2S/USB or SOURCE button. The Streaming Service LED will turn on/off
according. Stop when 'roon' LED is turned on. You are in I2S Setting Mode as the
'roon' LED on.
4. Toggle the LOCAL button momentarily, I2S/NET/LOCAL will turn on/off in a fixed
pattern to denote binary 000-111
5. Set the I2S Pinout to 000
6. Wait for 5s or Press the SETUP button once again to exit Setting Mode
7. STREAMER back in operational mode
I²S Pinout Configuration
MODE LED
I2S NET
DATA BCK
0 0 0
1 1 0
2 0 1
3 1 1
4 0 0
5 1 0
6 0 1
7 1 1
© DENAFRIPS CO. LTD. & VINSHINE AUDIO PTE. LTD. (SINGAPORE)
On
Setting Selection – Left
Setting Selection – Right
LOCAL PIN
LRCK MODE
0 0
0 1
0 2
0 3
1 4
1 5
1 6
1 7
Table 1. I2S PINOUT CONFIGURATION
ALL RIGHTS RESERVED
I2S PINOUT
DATA BCK
1 3 4
DATA- DATA+ BCK+
DATA+ DATA- BCK+
DATA- DATA+ BCK-
DATA+ DATA- BCK-
DATA- DATA+ BCK+
DATA+ DATA- BCK+
DATA- DATA+ BCK-
DATA+ DATA- BCK-
LRCK
6 7 9
BCK- LRCK- LRCK+
BCK- LRCK- LRCK+
BCK+ LRCK- LRCK+
BCK+ LRCK- LRCK+
BCK- LRCK+ LRCK-
BCK- LRCK+ LRCK-
BCK+ LRCK+ LRCK-
BCK+ LRCK+ LRCK-