Sealey PCT1 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instructions gloves
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using the workbench.
‰
Locate workbench in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Erect unit on a level and solid surface such as concrete.
‰
Keep children and unauthorised persons away from the work area.
9
DO NOT use the unit for any purpose other than that for which it is designed.
8
DO NOT clean the unit with any solvents which may damage the surfaces.
8
Ensure that the unit is properly and securely assembled before use.
9
2. INTRODUCTION
Mild steel plasma cutting table/workbench. 32 Replaceable cutting slats, order Model No. PCT1RS for a pack of 10 replacements.
Removable side handles/cable tidy hanging hooks. Supplied flat packed for easy self assembly using hand tools (not provided).
Supports weight capacity of 113kg.
3. SPECIFICATION
Model no.: ..................................................................... PCT1
Assembled dimensions (W x D x H ) .... 1065 x 600 x 812 mm
Bench dimensions ............................................920 x 600 mm
Replacement parts: Slats (pack of 10) ..................... PCT1RS
4. CONTENTS
© Jack Sealey Limited
PLASMA CUTTING TABLE/WORKBENCH
MODEL NO:
Wear safety Wear eye
footwear protection
Original Language Version
PCT1
PCT1 Issue 2 (1) 21/05/21