Symbols - Craftsman 11407 Operator's Manual

Some of the following symbols may be used on this worklight. Please study them and learn their meaning. Proper
interpretation of these symbols wirl allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
"_ Alternating Current Type of current
---= Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
Read The Operator's Manual operator's manual before using this product.
Q Protection Always wear safety goggles or safety glasses with side
Eye
shields and a full face shield when operating this product.
_, Safety Alert Precautions that involve safety.
your
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal iniury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
_J_ No Hands Symbol Failure to keep your hands away from the blade wilt result in
serious personal injury.
Hot Surface To reduce the risk of injury or damage, avoid contact with
any hot surface.
6