Advertisement
Quick Links
AUTOOL X60 Car OBD Multi-Function Meter
■Product Introduction
Supported Vehicle
For petrol vehicle with standard OBD-II protocol, especially for vehicle
without water gauge, speedometer and fuel consumption meter.
Installation
X60 is a OBD multi-function meter, with smart and fashion design. It is
easy to install. OBD port helps you use it once connection. No need to
destroy the wire.
Hardware
CPU based on 32 bit ARM CORTEX-M3 kernel; Maximum operating
frequency: 72MHz; Support multiple high speed auto communication
protocols.
Warning Function:
Supporting water temperature warning, over-speed alarm, shifting
reminding, vehicle malfunction warning, which secure safe driving.
Trouble code clearing:
Support code scanning and general code clearing.
Operating voltage: 10-18V DC
Sleep current: <15mA
Volume: 60mm×50mm×67mm
Product packing list: host, OBD cable, 3M double-sided tape, user
manual, certificate.
■Product Description
X60 OBD computer is a smart and powerful auto meter. It is
especially designed for vehicle without speedometer, engine
User Manual
Product Parameter
Operating current: <80mA
Operating Temperature: -20~75℃
Advertisement
Related Manuals for Autool X60
Summary of Contents for Autool X60
- Page 1 For petrol vehicle with standard OBD-II protocol, especially for vehicle without water gauge, speedometer and fuel consumption meter. Installation X60 is a OBD multi-function meter, with smart and fashion design. It is easy to install. OBD port helps you use it once connection. No need to destroy the wire.
- Page 2 X60 can also monitor and display battery voltage, engine charging voltage, overspeed alarm, engine temperature warning. It can even read the real-time data stream, scan and clear trouble code. ■Product Appearance 1.
- Page 3 1. Tear 3M doble-sided tape, and fasten it with holder base. 2. Pull up the bottom center to right and left. 3. Insert the base of holder to the bottom of host. 4. Insert the bolt from right, and nut from left. 5.
- Page 4 ■Product Installation and Operation Connect one side of OBD cable with car OBD port, the other side with X60 OBD port. After connection with host, start the car and wait X60 to connect with vehicle. Connecting successfully, the host ticks, and X60 displays vehicle protocol. Then, it will show parameter setting for the first use.
- Page 5 If the product doesnot support currenct data display, red X will be displayed. If funtion data needed cannot be selected, please check in the data stream of Electronic Control Diagnosis System. SPEED current speed SPEED AVG average speed WATER T. water temperature INTAKE T.
- Page 6 Choose the function“Scan DTCs”, it can read trouble code, and you can decide if clearing the code. Choose “Data Stream”. It will monitor real-time data. Turn right/left of the button, it will show page up and down. ■Vehicle Performance Test Vehicle performance test includes: speedup test, brake test, target speedup, brake initial speed - 6 -...
- Page 7 Before speedup test, please set target speedup. When it reaches to the scheduled speed, finish speedup test. Before brake test, please set brake initial speed. When it reaches to brake initial speed, calculate the distance from beginning to the end of acceleration.
- Page 8 8. Speed error adjustment - when the speed is 100km, adjust displayed speed of X60 to 100km. 9. Battery voltage adjustment - Adjust X60 voltage to display accurately. 10. Voltage warning - To remind the driver if the battery is under charge 11.
- Page 9 ■X60 Display Setting To set display in X60 In working condition, 4 types of information will display. They corresponds to the following content: 1 - Quick switch to displayed quantity and content 2,3 - Set more content 4 - Set to display instant fuel consumption or RPM bar The 10 round icons in the top are shift reminding display.
- Page 10 ■Product Information It helps to check software version, vehicle protocol and solution for protocol compatibility. ■About protocol compatibility When connecting with some vehicles, gauge LED or touble alarm LED may be lit. Please follow the “Matching inf” to operate - Please open OBD cable of product, and cut off the corresponding pins to solve the problem.
Need help?
Do you have a question about the X60 and is the answer not in the manual?
Questions and answers