Table of Contents
Advertisement
5. INITIAL SETTING
5- 1 Application setting
From Main menu, go to Communication → Setup, to open Setup window.
5-1-1 COM port setting (Fig. 5-1)
▪ Normally, it is configured automatically.
▪ if your pC has more than one COm port, select the COm port to be used under avail-
able COm port.
▪ By checking Save COm port, the selected COm port is saved.
During the next startup, the saved COM port is configured.
* when the uSB port is switched, the COm port number may change.
in that case, set the COm port number again.
5-1-2 Unit setting (Fig. 5-1)
the units for temperature and pressure can
be selected.
Temperature:Celsius ↔ Fahrenheit,
Pressure:Pa ↔ Psi
5-1-3 View setting (Fig. 5-1)
▪ Sampling interval setting
It can be configured in the range of 1sec. -
60sec..
En-9
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
Fig. 5-1
Advertisement
Table of Contents
