Advertisement
Inspection
and Service each 6 Months or 6,000 Miles
Suspension
I Inspect for bending loose fh._-
] Sectinn H] 2 I0
I
/
tenets,
W_rar
llett|
_Irue_u_
• Frumc
members
- Welds
• Slide-oul
Inspection
and Service
Each Year or 12,000 Miles
InspcclioniService
Inspect all fi'ame members_ bolls
&rivets
Repair or replace dam-
aged, worn oF broken parls
lnspcctall
wctdg
Repair as
needed
Clean dirt buikl-up
!. ubricatc
slides,shaftsandgears
Cheek WITIIDEALER
Mnnual
Section
Rel'etenee
Section I0 2 2
Section I0 2 2 1
Section 10 2 2 2
Structure
Section I0 2 I
• Axle Attachment Boll_
10,2
Inspection
and Serviee
Instructions
10o2oI Axle Boils, Frame,
Suspension,
& Structure
\Vorn or broken sttspetlsion paris can cause loss of control and
property damage, serious injmy and death may result Have
traitet professionally inspected mmually and alter any impact
To perform many of the inspection and maintenance activities, 3ou must jack up the
trailer,
When jacking and using jack stands, place them so as to clear wMng and suspension
parts (springs, torsion bars, etc)
Place jacks and jack stands inside of the perimeter
strip on the supporting structure to which the axles are attached
Never crawl under your trailer unless it is on firm and level gl ound
and resting on properly placed and secured jack stands
Never attempt to change the tire while traiter is in folded
position
Ti'aiIer can tip over
Faitme to heed these warnings could result in property damage,
serious injury and death
4S
Advertisement
