JVC JX-W9(E) Service Manual page 8

Note:
For connector locations, refer to page 30.
Removing the Top Cover ©
knobs B @) toward'you.
Removing the Reinforcement Plate
Removing the Rear Panel
3. Pull out the rear panel toward you.
'Removing the Wipe PCB Ass'y
1. Remove the top cover
@ , reinforcement plate (4 and
rear panel according the above procedures.
- 2. Hold the upper ends of four holders B @0 at the corners
of the Wipe
PCB with
pliers to unlock it, and lift it
up to remove it.
JX-W9
Removing the Sub PCB Ass'y @)
procedure.
supply IC.
N
ooh W
(No. 70053) 9°